Insert location

4.Use [4] and [6] to select the built-in subject that you want to insert into the image and then press [SET].

*Only built-in subjects that can be inserted into other images will appear at this time.

5.If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject in the movie. Use [4] and [6] to shift the location to the position you want. After you are finished, press [SET].

• If you insert a subject into a movie, the resulting movie will be a maximum of 20 seconds long.

Everything before and after the insertion is cut off.

If the movie you are inserting into (original movie) is shorter than 20 seconds, the resulting movie will be the same length as the original movie.

•If you are inserting a subject into a snapshot, skip directly to step 6.

6.Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position. When everything is the way you want, press [SET].

This inserts the subject into another image and creates a Dynamic Photo.

7.After creation of the Dynamic Photo image is complete, the finished image will appear on the monitor screen.

4

Creating a Dynamic Photo Image