[p] (PLAY)

Viewing Snapshots

Use the following procedure to view snapshots on the camera’s monitor screen.

•For information about how to play back movies, see page 97.

•For information about images recorded using continuous shutter (CS), see page 99.

1. Press [p] (PLAY) to enter the

PLAY mode.

• This will display one of the snapshots currently stored in memory.

• Information about the displayed snapshot also is included (page 12).

• You also can clear the information to view only the snapshot (page 161).

•You can zoom in on the image by

sliding the zoom controller towards z (page 104). If you are recording a snapshot that is very important to you, it is recommended that you zoom the image and check its details after recording it.

2.Use [4] and [6] to scroll between images.

•Holding down either button scrolls at high speed.

[6][6]

[4][4]

NOTE

•Half-pressing the shutter button while in the PLAY mode or while a menu screen is displayed will switch directly to the REC mode.

28

Quick Start Basics