Using the Control Panel
The control panel can be used to configure camera settings. | [8] [2] [4] [6] |
1. In the REC mode, press [SET].
[SET]
2.Use [8] and [2] to select the setting you want to change. This will select one of the control panel icons and display its settings.*1
1Image size/Quality*2 (pages 41, 102)
2ISO sensitivity (page 44)
3White balance (page 45)
4EV shift (page 46)
5Not displayed in this mode
6Not displayed in this mode
7Not displayed in this mode
8Flash (page 47)
9Date/Time (page 49)
Control panel
1
2
3
4
5
6
7
8
9
*1 Items displayed in the control panel depend on the recording mode. *2 Image quality cannot be changed using the control panel.
3.Use [4] and [6] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.
40 | Snapshot Tutorial |
|