Casio EX-ZS10 First, charge the battery prior to use, To load the battery, 2.Load the battery, 1.Open the battery cover, 3.Close the battery cover

First, charge the battery prior to use.

Note that the battery of a newly purchased camera is not charged. Perform the steps below to load the battery into the camera and charge it.

•Your camera requires a special CASIO rechargeable lithium ion battery (NP-120) for power. Never try to use any other type of battery.

To load the battery

1.Open the battery cover.

Pressing the battery cover, slide it in the direction indicated by the arrow.

2

1

2.Load the battery.

With the EXILIM logo on the battery facing downwards (in the direction of the lens), hold the stopper next to the battery in the direction indicated by the arrow as you slide the battery into the camera. Press the battery in until the stopper secures it in place.

Stopper

Battery contacts

EXILIM logo

Front Back

3.Close the battery cover.

Pressing the battery cover against the camera, slide it closed.

•For information about how to replace the battery, see page 122.

1

2

15 Quick Start Basics