.To charge using a USB connection to a computer

The battery loaded in the camera is charged whenever the camera is connected directly to a computer with the USB cable.

Depending on the setup of your computer, you may not be able to charge the camera’s battery over a USB connection. If this happens, use of the USB-AC adaptor that comes with the camera is recommended.

IMPORTANT!

The first time you connect the camera to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

1.Press [ON/OFF] (Power) to turn off the camera.
2.With your computer turned on, connect the camera to it.

The back lamp should light red, indicating that charging has started.

The back lamp will go out when charging is complete. It takes about 130 minutes to achieve a full charge. Charging may take longer depending on charging conditions.

USB port

USB cable

(included with camera)

 

Large connector

 

[USB/AV] port

 

Small connector

Making sure that the mark on the USB cable connector is towards the lens side, connect the cable to the camera.

Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

17

Quick Start Basics