
NOTE
•ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen when you
•If the flash fires, the Anti Shake icon S will remain on the display, even though Anti Shake does not function during flash photography.
•The ISO sensitivity setting (page 66) must be “Auto” for Anti Shake to work.
•Shooting with Anti Shake can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution.
•Anti Shake may not be able to eliminate the effects of camera or subject movement when movement is severe.
•Anti Shake is disabled during movie recording.
Specifying the Auto Focus Area (AF Area)
Procedure
[r] (REC) * [SET] * MENU * REC Tab * AF Area
|
| Spot | This mode takes readings of a small area in the center of the |
| Û | ||
| image. This setting works well with focus lock (page 58). | ||
|
|
| |
|
|
| When you |
|
| Multi | the camera will select the optimum Auto Focus area from among |
| È | ||
| nine possible areas. The focus frame of the area where the | ||
|
|
| |
|
|
| camera focuses will be displayed in green. |
|
| Tracking | |
| Ë | ||
| causes the focus frame to track the movement of the subject. | ||
|
|
| |
|
|
|
|
“Û Spot” or “Ë Tracking” | “È Multi” |
Focus frame | Focus frame |
IMPORTANT!
•Auto Focus is disabled when W (Manual Focus) is selected for the focus mode (page 57), even if you select an AF area.
•Selecting “Ë Tracking” can cause vibration and noise to occur due to lens operation while tracking a subject. This does not indicate malfunction.
61 | Advanced Settings |
|