Power Supply
Charging
If the [CHARGE] lamp flashes red...
•Charging cannot be performed because ambient temperature or the temperature of the charger is too hot or too cold. Leave the camera in a location whose temperature is within the range where charging can be performed. When the camera returns to a temperature where charging can be performed, the [CHARGE] lamp will light red.
•Check if the charger and battery contacts are dirty. If contacts are dirty, wipe them clean with a dry cloth.
If problems continue to occur after you perform the above steps, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center.
To replace the battery
1. Open the battery cover and | Stopper |
remove the current battery. |
|
With the monitor screen side of the camera facing upwards, slide the stopper in the direction indicated by the arrow in the illustration. After the battery pops out, pull it the rest of the way out of the camera.
2.Load a new battery.
128 | Appendix |
|