Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[8] [2] [4] [6] | Available settings Control Panel |
| 1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 |
| 7 |
| 8 |
[SET] | 9 |
2.Use [8] and [2] to select the setting you want to change.
1Image size/Quality* (pages 32, 67) | 6White balance (page 40) |
2Flash (page 35) | 7EV shift (page 42) |
3Face detection (page 37) | 8easy Mode (page 43) |
4Anti shake (page 39) | 9Date/Time (page 45) |
5ISO sensitivity (page 40) |
|
*Image quality cannot be changed using the Control Panel.
3.Use [4] and [6] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.
NOTE
•You also can configure settings other than those listed above (page 55).
•The Control Panel cannot be displayed while a For YouTube, or Voice Recording Operation is in progress.
31 | Snapshot Tutorial |
|