| Problem | Possible Cause and Recommended Action |
|
| A recorded image | 1)Camera power may have been turned off before the save | |
| was not saved. | operation was complete, which will result in the image not | |
|
| being saved. If the battery indicator shows | , charge the |
|
| battery as soon as possible (page 18). |
|
|
| 2)You may have removed the memory card from the camera | |
|
| before the save operation was complete, which will result in | |
|
| the image not being saved. Do not remove the memory card | |
|
| before the save operation is complete. |
|
|
|
| |
| Though available | Not enough light is reaching the subjects. Change the flash | |
| lighting is bright, | mode setting to < (Flash On) for daylight synchro flash (page | |
| the faces of people |
| |
| in the image are |
|
|
| dark. |
|
|
|
|
| |
| Night shots come | Use the following BEST SHOT scenes (page 52) when shooting | |
| out bad. | at night. |
|
|
| • Night Scene (for shooting night scenery only) |
|
|
| • Night Scene Portrait (for shooting people against night | |
|
| scenery) |
|
|
|
| |
| Subjects are too | Sunlight reflected by water, sand, or snow, can cause | |
| dark when shooting | underexposure of images. Change the flash mode setting to < | |
| images in a | (Flash On) for daylight synchro flash (page 35), or adjust EV | |
| seashore or ski | shift to the + side (page 42). |
|
| area. |
|
|
|
|
| |
| Digital zoom | 1)The digital zoom setting may be turned off. Turn on digital | |
| (including HD | zoom (page 65). |
|
| zoom) does not | 2)Date stamping may be turned on, which will cause digital | |
| work. The zoom | zoom to be disabled. Turn off date stamping (page 112). | |
| bar indicates zoom |
|
|
| only up to a zoom |
|
|
| factor of 3.0. |
|
|
| The image is out of | 1)Focusing may not be possible because the subject is outside | |
| focus during movie | the focus range. Shoot within the allowable range. | |
| recording. | 2)The lens may be dirty. Clean the lens (page 124). | |
|
|
|
|
137 | Appendix |
|