5. Data Editing

2. Double-click on the item to launch the program editor.

3. Input the contents of the program.

• See “8. Program Editor” for details on inputting program contents.

4. Select [File] - [Close] to quit the program editor.

5. Select [File] - [Save] to save the catalog file.

Note

•Program passwords are ignored by this software.

•When a program with password is transferred from the calculator to the computer, the password is ignored.

•You cannot edit a BASE program.

Displaying, Editing, and Printing Items

kTo display and edit an item

1. While an item is selected, select [Item] - [Open] to display the contents of the item.

•In addition to using [Item] - [Open], you can also double click on an item to display its contents.

•If the item is a program, you can use the program editor to edit its contents.

Note

•You cannot display the contents of G-Mem, Picture, or Dyna-Mem items.

•You can only edit RUN programs. You cannot edit BASE programs. Program passwords are ignored by the software.

kPrinting

1. While an item is displayed, select [File] - [Print].

2. Specify the printer, print options, number of copies, and enlargement factors, and then start the printing.

•You can use the preview function to display an image of the printout on the screen.

Note

•You can print approximately 70 characters on an A4 size sheet of paper when the font size is 10. To print more data, reduce the size of the printout.

E-43