• NORM 1

With NORM 1, exponential notation is automatically used for integer values with more than 10 digits and decimal values with more than two decimal places.

• NORM 2

With NORM 2, exponential notation is automatically used for integer values with more than 10 digits and decimal values with more than nine decimal places.

To switch between NORM 1 and NORM 2

Press F9. There is no indication on the display of which format is currently in effect, but you can determine the setting by performing the following calculation.

1 \200 =

5. –03

NORM 1 format

 

 

 

 

0.005

NORM 2 format

•All of the examples in this manual show calculation results using the NORM 1 format.

kWhen you have a problem...

If calculation results are not what you expect or if an error occurs, perform the following steps.

1.F0(COMP mode)

2.F4(DEG mode)

3.F9(NORM mode)

4.Check the formula you are working with to confirm it is correct.

5.Enter the correct modes to perform the calculation and try again.

—22 —