Before Using the Calculator

for the First Time...

Batteries are not loaded in your calculator at the factory.

Be sure to follow the procedure below to load batteries and adjust the display brightness before trying to use the calculator for the first time.

1.Making sure that you do not accidentally press the Mkey, attach the front cover to the front of the calculator and then turn the calculator over. Remove the battery cover from the calculator by

pulling with your finger at the point marked .

1

2.Load the four batteries that come with the calculator.

•Make sure that the positive (+) and negative (–) ends of the batteries are facing correctly.

3.Replace the battery cover, making sure that its tabs enter the holes marked

.

•This automatically turns on the calculator.

2

4. Turn the calculator front side up and remove the front cover from the calculator.

•heck to make sure that the message language selection screen is displayed.

5. Use the Dand Ato select the language you want, and then press (SELECT).

E-3