Casio GV-10 ●About rechargeable batteries

GETTING ACQUAINTED

The following examples show how alkaline battery life changes under different conditions.

Example 1: Intermittent use of the camera shortens battery life.

Conditions

•Temperature: 25° C

•Repeat of a cycle of recording of one shot per minute for 10 minutes, followed by one minute of playback, and a nine minutes of power off

•Flash on

Approximate Battery Life: 190 minutes (173 shots)

Example 2: Low temperatures shorten battery life.

Conditions

•Temperature: 0° C

•Repeat of a cycle of recording of one shot per minute for 10 minutes, followed by one minute of playback, and a nine minutes of power off

•Flash on

Approximate Battery Life: 30 minutes (28 shots)

●About rechargeable batteries

Use only the nickel-metal hydride batteries (NP-H3) that are available from your dealer as options for this camera. Proper camera operation is not guaranteed when other rechargeable batteries are used.

AC Adaptor/Charger : BC-3HA

Nickel-metal hydride batteries (4-battery set)/Quick Charger Set : BC-1HB4

Nickel-metal hydride batteries (4-battery set) : NP-H3P4

IMPORTANT!

•Be sure to keep all four batteries together as a set at all times, for both charging and powering the camera. Mixing batteries from different sets can shorten overall battery life and cause malfunction of the camera.

•Rechargeable batteries cannot be charged while they are loaded in the camera.

33

Contents

User’s Guide Unpacking Contents 45 RECORDING IMAGES PLAYBACK DELETING IMAGES MANAGING IMAGES 70 OTHER SETTINGS 81 REFERENCE 72CONNECTING TO EXTERNAL EQUIPMENT Quick Reference Getting Ready Recording an Image (page 45) Press the shutter release button Move the POWER ON/OFF switch to ON Playback (page 60) Use [+] (forward) and Align the dial with (play mode) Deleting Images (page 64) Press WB Press the shutter the image Check to make sure you really want to delete the currently displayed image IMPORTANT Features Water Resistance and Dust Resistance Operating Environment This is not an underwater camera Operating Precautions Wipe the camera dry after it becomes wet Location Precautions Page Inspecting the Cover O-rings If you find dirt on an O-ring Before putting your camera away after using it 1.Immerse the camera in water and wash it 2.Wipe the camera dry Precautions Data Error Precautions Operating conditions Condensation About the camera’s backlight… Lens Precautions Declaration of Conformity General Guide [+] / [–]buttons Shutter release button Flash Exposure sensor (Flash/Nine Image) button Operation lamp Viewfinder Monitor screen USB port Tripod screw hole DC IN 6V terminal Opening and Closing the Terminal Cover Terminal Monitor Screen Indicators ●Recording Modes ●Play Mode ●SET UP Mode Indicator Lamps Using the Bundled Accessories ■Using the Strap Attaching the Lens Cap Power Requirements 5. Check to make sure the O-ringand contact surface of the battery com partment is not ●Battery Life Guidelines ●Tips for Prolonging Battery Life ●Alkaline Battery Life ●About rechargeable batteries Battery Handling Precautions Low Battery Indicator Using AC Power 2.Move the terminal cover release to theposi- tion and then open the cover 3.Plug the AC adaptor to the DC IN 6V terminal AC Adaptor precautions Turning the Camera On and Off Use the POWER ON/OFF switch to turn the camera on and off ON : Power on OFF: Power off Power Save Settings Memory Cards Removing a Memory Card from the Camera 5.Press the card eject button as far as it will go 6.Remove the memory card from the camera 7.Securely close the battery cover and rotate the battery cover knob to theposition to secure it in place Formatting a Memory Card 1.Turn on the camera, and then align the dial with SET UP Use [+] and 3.Use [+] and [–]to select “FORMAT” and then press the shutter release button 4.Use [+] and [–]to select “YES” and then press the shutter release button Setting the Current Date and Time Setting the Date and Time Setting the Date and Time Selecting the Date Format