Operation Guide
USING THE STOPWATCH 2
LAP/SPLIT TIMES
Lap and split times are automatically stored in memory. There is enough memory to hold up to 99 lap/split time records (01 to 99), plus the total elapsed time. The displayed lap number will flash when memory is full.
Pressing C while memory is full will display the current lap/split times along with the flashing lap number, without storing them in memory.
Records can be recalled by pressing the Rbutton.
| START |
|
|
|
| STOP | RESET | |
|
| 1ST LAP |
| 2ND LAP |
| 3RD LAP |
|
|
| 0 | a | (a) | b | (b) | c | (c) |
|
MEASURE- |
|
|
|
|
| |||
|
|
|
|
|
|
|
| |
MENT |
| 1ST SPLIT (a) |
|
|
|
|
| |
|
|
|
|
|
|
|
2ND SPLIT (a+b)
3RD SPLIT (a+b+c)
BUTTON
OPERATION
DISPLAY
Recording the Finishing Times of Multiple Runners
After pressing Ato start timing, press Cas each runner crosses the finish line. This records each of the finishing times in memory, which you can recall by pressing the Rbutton.
*Recorded times are retained in memory until you start a new net elapsed time operation (by pressing A) after clearing the stopwatch screen to all zeros (by pressing C).
Example : To record the times of 10 different runners.
START | 1ST RUNNER | 2ND RUNNER | 9TH RUNNER | 10TH RUNNER |
| FINISHES | FINISHES | FINISHES | FINISHES |
MEASURE-
MENT
BUTTON
OPERATION
You can scroll through records in memory by pressing , even while the stopwatch is still running.
SETTING TIME AND DATE
1) While the TIME screen is displayed, hold down Cfor a few seconds to display the setting screen.
2) Press Ato reset seconds count to 00.
3) Press C to move flashing between settings.
SECONDS HOUR MINUTES YEAR
DAY OF THE WEEK |
| DAY |
| MONTH |
4) Press Ato change (+) selected setting. Hold down Ato change at high speed.
5) To exit the setting screen, press Bat any time or Cwhile the day of the week setting is flashing.
*Year setting is possible up to 2099.
Auto Return
The setting screen automatically returns to the TIME screen if you do not perform any operation for a few minutes.
CARE OF YOUR STOPWATCH
•This stopwatch is water resistant up to five bars (atmospheres), which means you can use it in the rain or in areas where splashing water is present. Never operate the buttons of the stopwatch while it is immersed in water.
•You should have the rubber seal that keeps out water and dust replaced every 2 to 3 years.
•Should moisture appear inside the stopwatch, have it checked immediately by your retailer or a CASIO distributor.
DISPLAY
Press .
|
| Difference between this runner’s time |
Runner’s time |
| and the previous runner’s time |
Runner’s finishing position
2