
USER’S GUIDE
SETTING THE TIME
1.Press the SET button (2) to cycle through the setting screens as shown below. Normal Timekeeping Screen
| Year Setting Screen | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Month and Day Setting Screen |
|
|
| Time Setting Screen | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1.Open the battery compartment cover as shown in the illustration.
2.Remove both old batteries.
3.Load new batteries. Make sure that their positive (+) and negative
4.Replace the battery compartment cover.
5.Press the RESET button (3). Be sure to press the RESET button (3) after replacing batteries.
Battery precautions
•Be sure to load the batteries with their positive (+) and negative
•Replace the batteries at least once a year, even if the current batteries are working properly.
•Never charge the batteries that come with the clock.
•Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin.
•The batteries that come with the clock lose some of their power during transport and storage.
•Never mix old and new batteries, or batteries of different brands.
2. While the screen you want is on the display, use the Time Set buttons (1) to change the digits that are flashing.
Press + to increase | Press – to decrease |
the flashing digits. | the flashing digits. |
•Holding down + or – changes the flashing digits at high speed.
•You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with the date setting.
•Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.
•Each press of + or – while the
3.After making the settings you want, use the SET button (2) to display the Normal Timekeeping Screen.
•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation.
2