Using the Printer

When Using Formed Sheet Paper

Attaching the Paper Holder

Attach the separately sold Paper Holder (HA-B93PH)* when printing on formed sheet paper. The Paper Holder is composed of four parts and four screws.

In addition, a PC card cushion is enclosed to prevent the PC card from being dislodged by an impact and so forth. Use this card as necessary.

Part C

Part B

Part A

PC card cushion

 

Part D

Screws (4)

1.Check that the power is off. If the power is on, always make sure to turn it off by pressing the power key.

2.Press the ridged ( ) portions ( 1 ) of the splash protect cover while spreading apart the left and right locks ( 2 ) to disengage as shown in the illustration, and then open the splash protect cover ( 3 ).

3.Slide the lock knobs on the left and right sides of the roll paper holder as shown in the illustration to align at the FREE position ( 2 ), and then push up the ridged () portion ( 2 ) to open.

•Please note that the positions of the lock knobs on the left and right sides are different.

 

1

1

3

2

 

2

2

LOCK FREE

1

1

FREE

LOCK

4.Turn over the Handheld Printer Terminal.

*Not available for IT-3100M75E.

E-34