•Using Labels
Label will not adhere to a surface.
Possible Causes | Action |
|
|
The backing paper is still | Peel the backing paper from the back of the |
on the back of the tape. | tape to expose the adhesive. |
|
|
Surface is unsuitable for | Labels do not adhere well to surfaces that are |
affixing a tape. | rough, wet, oily, or dirty. |
|
|
Error Messages
Message | Possible Causes | Action | |
ERR! | • Attempt to input two B | • Use only one B mark. | |
* This message | marks within the same | Only two lines of text can | |
text. | be input, so text can | ||
appears on the | |||
| contain only one B | ||
screen for about |
| ||
| mark. | ||
one second. | • Attempt to input B mark | ||
• Do not use B marks. | |||
| |||
| while 6mm is specified as | 6mm tape can have only | |
| the tape width. | one line of text, so text | |
|
| cannot contain any B | |
| • Label text containing a | marks. | |
| • Delete the B mark to | ||
| B mark was input and | print on 6mm tape or | |
| then tape width specifica- | switch back to a wider | |
| tion was changed to | tape. | |
| 6mm. (ERR! message |
| |
| appears when you try to |
| |
| perform a print operation.) |
| |
| • Text that is longer than | • Shorten the text to be | |
| 5.5cm when stamp | printed and try again. | |
| printing is selected. |
| |
| • Attempt to print a stamp | • Change the tape width | |
| while 6mm is specified for | setting to OFF and try | |
| the tape width. | printing the stamp again. | |
| • Input of any of the | • Input the value correctly. | |
| following for while using |
| |
| the currency conversion |
| |
| functions: RATE, PRINT |
| |
| A → B (⎟), or PRINT B→ |
| |
| A (⋅). |
| |
| • A value with more than |
| |
| eight digits or more than |
| |
| seven digits with a |
| |
| leading decimal point. |
| |
| • More than one decimal |
| |
| point character |
| |
|
|
|