•Replace the batteries in accordance with the battery life marked on the side of the battery.

Warning!

•Never use recharged batteries with the unit.

•Do not expose batteries to direct heat, do not short circuit them, and do not try to take them apart.

•Keep batteries out of the reach of small children. If swallowed, consult with a physician immediately.

•Be sure to replace the batteries in accordance with the battery life printed on the side of the battery itself.

To load the batteries

Caution

•Do not touch the springs inside the battery compartment cover with your fingers while

loading or replacing batteries. The springs have sharp areas and can cut your fingers.

1. Turn power off.

4. Replace the back cover.

• As shown in the illustration, hook the cover on the battery side of the compartment first, and then close the cover.

• Make sure that the tape cartridge is securely in place and that the back cover is closed securely before using the label printer. A loose tape cartridge can cause print quality prob- lems.

AC Adaptor

Note the following important precautions when using an AC adaptor to power your Label Printer.

•Use only a genuine CASIO AD-A95100 AC adaptor with the same voltage rating as the household current in your area. Using a wrong adaptor can damage your Label Printer.

•Be sure to turn the Label Printer off before you connect the adaptor. Do not turn power on until the adaptor is connected to the Label Printer and plugged into and AC outlet.

•Be sure to unplug the AC adaptor from the AC outlet whenever you are not using the Label Printer.

•If you are using the optional AC adaptor for power, you should also unplug it from the Label Printer.

2. Turn over the label printer and remove the cover as shown in the illustration.

3. Load batteries into the battery compartment.

•Be sure to use alkaline batteries.

• Make sure the positive (+) and negative (–) ends of the batteries are facing correctly when you load them.

AC Adaptor Cap

Remove the ADAPTOR CAP before connecting the AC adaptor.

Insert the adaptor cap into the ADAPTOR CAP holder located inside the back cover to avoid losing the cap.

ADAPTOR CAP

ADAPTOR CAP holder

Inside back cover

E-6