Using Tone Effects
Reverb: Makes your notes resonateChorus: Adds more breadth to your notes1Press the REVERB/CHORUS button to cycle through the effect settings as shown below.
•You can find out the current effect setting by looking at the REVERB and CHORUS indicators.
OnOnOnOff
Reverb on |
| Chorus on |
| Both on |
| Both off | ||
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2After turning on the effect you want, use the number buttons or the
•Note that you need to select an effect type with the number buttons or the
Reverb | 0: Room 1 | Chorus | 0: Chorus 1 |
| 1: Room 2 |
| 1: Chorus 2 |
| 2: Hall 1 |
| 2: Chorus 3 |
| 3: Hall 2 |
| 3: Chorus 4 |
Turning the Key Light System On and Off
Use the following procedure when you want to turn the key light system on or off.
To turn the key light system on and off
1Press the KEY LIGHT button to toggle the key light system on and off.•The KEY LIGHT indicator disappears when the key light system is turned off.Using the Microphone Jack
Connecting a commercially available microphone* to the MIC IN jack makes it possible to sing along with the keyboard’s
*If a microphone was included with your keyboard, use that microphone. If your keyboard did not come with a microphone, use a commercially available microphone that satisfies the stipulated specifications.
1Set the MIC VOLUME slider setting so it is on the “MIN” side.2Turn on the microphone’s on/off switch.3Use the MIC VOLUME slider to adjust microphone volume to the level you want.[Rear Panel]
Microphone on/off switch
Microphone
MIC VOLUME slider
IMPORTANT!
•Be sure to use the microphone’s on/off switch to turn off the microphone and to disconnect the microphone from
the keyboard whenever you are not using it.NOTE
•The key light system is turned on automatically whenever you turn on keyboard power.