Using a SmartMedia Card

Getting Ready

IMPORTANT!

•Before you can use a SmartMedia card with this keyboard, you need to perform the procedure below to format it. After formatting the card, transfer SMF data from your computer to the card.

•Formatting a SmartMedia card with this keyboard automatically creates a folder named “CASIO_MD” on the card. When transferring SMF data from your computer to the card for use by the keyboard, be sure to store it in the “CASIO_MD” folder.

•Note that formatting a card that already contains data causes all of that data to be deleted. Data deleted by the format operation cannot be recovered. Before performing the procedure below, check to make sure that the media does not contain any data you might need.

PREPARATION

•Insert the SmartMedia card you want to format into the keyboard’s card slot. Make sure that the sticker is removed from the card’s write area, which enables writing.

To format a SmartMedia card

1Press the FUNCTION button a number of times until the card format setting screen appears.

F o r ma t ?

2Press the [+] (YES) button.

•This will display a confirmation message asking whether you really want to format the media.

3Press the [+] (YES) button to start formatting.

•The message “Pls Wait” will remain on the display to indicate that a procedure is being performed. Never try to perform any other operation on the keyboard while the card is being formatted. After formatting is complete, the keyboard returns to the mode you were in before you displayed the setting screen.

•To cancel the format operation, press the [–] (NO) button. This returns to the card format setting screen.

•If an error message appears on the display, see “SmartMedia Card Error Messages” on page E-60. Pressing the FUNCTION button while an error message is on the display returns to the card format setting screen.

Reading a SmartMedia card

1Press the CARD button.

2Use the number buttons to input the three-digit number that corresponds to the SMF data you want to select.

3Perform one of the following operations.■To play back SMF data3-1Press the START/STOP button.•The keyboard will read the SMF data and play it.•Repeat operation is not supported while playing SMF data.■To sing along with SMF data3-1Press the PLAY/STOP button.•The keyboard will read the SMF data and play it in the Sing Along Mode.

•Repeat operation is not supported while playing SMF data.

•Playback volume is lower for SMF data part that is assigned to Channel 4.

•When you select and start playback of a song that includes lyric data while the keyboard is connected to a TV, a sing along screen showing the song lyrics will appear on the TV.

■To use SMF data in a 3-Step Lesson3-1Press the STEP 1, STEP 2, or STEP 3 button.

•The keyboard will read the SMF data and start a lesson at the step you selected.

•An error message will appear if the selected SMF data file is larger than about 80 Kbytes.

•If an error message appears, see “SmartMedia Card Error Messages” on the following page for information about what you need to do.

•The channel specified as the navigate channel is assigned to the right-hand part, while the channel that is one less than the channel specified as the navigate channel is assigned to the left-hand part.

•Voice Fingering Guide and on-screen fingering indicators, are not supported for SMF data.

NOTE

•You cannot loop measures (page E-23) of SMF data read from a SmartMedia card.

E-58

 

649A-E-060B

LK90TV_e_45-61.p65

58

04.8.18, 4:45 PM