Recorded Data Storage
•Anything previously stored in song memory is replaced whenever you make a new recording.
•Song Memory contents are retained even when power is turned off, as long as the keyboard is being supplied battery or AC adaptor power. If you remove the batteries or should the batteries go dead while the keyboard is not being supplied power by the AC adaptor, song memory contents will be deleted. Be sure to supply power to the keyboard with the AC adaptor when replacing batteries.
•Turning off the keyboard while a record operation is in progress causes the contents of the track you are currently recording to be lost.
Recording Play Along with a Builtin Tune
You can use the lesson recording procedure to record notes you play along with one of the keyboard’s
Selecting Parts
Press the part/track button that corresponds to the part(s) you want to select as the recording part(s).
| To select this part: | Press this button: | |
|
| |
LEFT/TRACK 1 | ||
|
| |
RIGHT/TRACK 2 | ||
|
| |
Both hands | LEFT/TRACK 1 + | |
RIGHT/TRACK 2 | ||
|
The part that is currently selected is indicated by the part/ track indicators (L and R) that appear on the display as described below.
Part/Track Indicators in Playback Standby
Each press of a part/track button toggles playback of that part on (part/track indicator displayed) and off (indicator not displayed).
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
part |
|
|
|
|
| part | ||
|
| |||||||
Playback |
|
|
|
|
|
|
| No playback |
|
|
|
|
|
| |||
(displayed) |
|
|
|
|
| (not | ||
|
|
|
|
|
|
|
| displayed) |
Example: The above indicates that
Part/Track Indicators in Recording Standby
Press the part/track button of the part you want to play on the keyboard (recording part). This causes its part/track indicator to flash. The part/track indicator of the other part will remain displayed (without flashing) to indicate that it will play back during recording (playback part).
Playback | Recording |
part | part |
(displayed) | (flashing) |
Example: The above indicates the