Percussion Pads
Using the Percussion Pads
Each of the five
(ACOUSTIC SNARE 1, OPEN
Assigning Sounds to Percussion
Pads
You can assign the percussion sound you want to each of the percussion pads.
❚NOTE
•Turning off power causes the sounds assigned to the percussion pads to return to their initial defaults.
1. While holding down the TONE button, use the number buttons to i n p u t 4 9 , w h i c h s e l e c t s t h e Percussion tone.
2. Look at the 16 white keys (C3 through D5) in the center of the keyboard that are marked with images of percussion instruments, and find the sound you want to assign to a pad.
3. While pressing down on the percussion pad to which you want to assign the sound, press the white key you selected in step 2.
4. Tap the percussion pad with your finger to hear the sound assigned to it.
Transpose
The initial power default setting is middle C (00). You can transpose the key of the keyboard in semitone steps in the range of
1. Press the TRANSPOSE [] button to raise the key one semitone, or the TRANSPOSE [] button to lower it one semitone.
•To return the tuning to its initial power
on default setting (00), press the TRANSPOSE [] and [] buttons at the same time.
•Transpose is also returned to its initial power on default setting (00) whenever you turn on power.
Page 24 | 03.10.8, 10:45 AM Adobe PageMaker 6.5J/PPC |