Operation Guide 4343

 

 

To set the alarm time

Using the Alarms

 

 

Example: To change the alarm setting from midnight to 3:00 p.m.

3. When everything is the way you want, press the

The watch beeps for 10 seconds when the Timekeeping Mode time reaches the currently set alarm time.

The alarm will sound when the current time in your Home City matches the alarm time.

Press the Cbutton to enter the Alarm Mode.

If you are entering from the Chronograph Mode, the chronograph must be reset first. See “Chronograph Reset” for more information.

Alarm Mode

ON or OFF

To turn the alarm on or off

In the Alarm Mode, press the C button to toggle the alarm on and off.

When the alarm is turned on, a beeper sounds when the alarm time is reached.

OFF

ON

1.

In the Alarm Mode, hold

ON

 

 

down the Abutton for

 

 

about five seconds until

 

 

the indicator hand moves

 

 

to “ON” and the second

 

 

hand moves to zero.

 

This indicates the setting mode.

30

0

Abutton to exit the alarm setting mode.

This will exit the alarm setting mode and the second hand will resume normal operation.

The watch will exit the alarm setting mode automatically if you do not perform any button operation for about two or three minutes.

30

30

Alarm Setting

(24-hour Format)

To return to the Timekeeping Mode from the Alarm Mode, press the Bbutton. Note that you cannot return to the Timekeeping Mode while in the alarm setting mode.

30

30

To stop the alarm

Pressing any button while the alarm is sounding stops it.

2. Use the D(+) and B(–) buttons to change the alarm setting in one- minute increments.

Each press of either button changes the setting by one minute.

Holding down either button will cause the hands to move at high speed. Once started, high-speed hand movement will continue even if you release the button. To stop high-speed hand movement, press any button.

Alarm time

(–)

30

(+)

The alarm time uses 24-hour timekeeping format.

Setting the Time and Date Manually

4. When everything is the way you want, press the Abutton to exit the setting mode.

You can perform the following procedures to adjust the time and date when the watch is unable to receive a time calibration signal for some reason.

2. Use the D(+) and B(–) buttons to change the hour and minute setting.

24-hour Hand

Hour, Minute

(–)

The second hand will resume

30

normal operation.

 

Pressing Ato restart

1. In the Timekeeping Mode hold down the Abutton until the indicator hand completes the following sequence of operations: indicates the last signal reception result, moves to the “READY” position, moves to 12 o’clock.

Indicator Hand

30

Each press of either button changes the setting by one minute.

Holding down either button will cause the hands to move at high speed. Once started, high-speed hand movement will continue even if you release the button. To stop high-speed hand movement, press any button.

30

DateHour,

(+)Minute

(+)

timekeeping on a time signal

on the TV or radio ensures

precise setting.

The watch will exit the setting

mode automatically if you do

not perform any button

operation for about two or

three minutes.

When you are using the watch in an area that supports time calibration signal reception, it will adjust the date automatically

This is the setting mode.

Keep Abutton depressed until the indicator hands stops at 12 o’clock.

The second hand also will move to “0” at this time.

Second Hand

When setting the time, make sure you also watch the 24-hour hand so the time is set properly (1:00 a.m. = 1 o’clock, 1:00 p.m. = 13 o’clock).

3.Use the Cbutton to change the day setting.

Each press of the Cbutton advances the day by one.

for month lengths and leap years. If you use it in an area that does not support signal reception, you will have to make adjustments for month lengths and leap year manually.

6