To set the digital time and date
1.In the Timekeeping Mode, hold down Auntil the seconds start to flash, which indicates the setting
screen.
2. Press Ctwice to move the flashing to the Home City code setting (see the illustration below), and then use B and D to select the code you want.
•Make sure you select your Home City code before changing any other setting.
•For full information on city codes, see the “City Code Table” at the back of this manual.
3.Press Cto move the flashing in the sequence shown below to select the other settings.
Seconds |
|
| DST |
|
| Home City Code |
|
| Hour |
|
| Minutes |
|
|
|
|
Illumination Duration Day Month Year