Connecting Directly to a PictBridge Compatible Printer
You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the camera to connect the
camera to your printer’s
USB port.
• The camera does not draw power over the USB cable. Make sure
the camera’s battery is
sufficiently charged before connecting.
• Make sure that you insert the cable
connector into the USB/ AV port until you feel it click securely into place. Failure to insert the
connector fully can result in poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown
in the illustration.
•When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.
115 | Printing |
|