Casio PA-2500 manual Installation of Satellite I/O Box 1 unit, Environment Setup

2.4Installation of Satellite I/O Box (1 unit)

Environment Setup

1)Make sure that the POWER switch of the I/O Box is set to OFF.

2)Set the DIP switches provided on the rear panel to the following.

Table 2.1

1	2	3	4	5	6	7	8	9	10
ON	OFF	OFF	OFF	ON	OFF	ON	ON	ON	ON

Note:

The above settings assume that the communication speed is set to 115,200 bps. To set a different baud rate modify the SW6, SW7, and SW8 settings as follows:

Table 2.2

Baud Rate	SW6	SW7	SW8
9,600 bps	OFF	ON	OFF
19,200 bps	ON	ON	OFF
38,400 bps	OFF	OFF	ON
57,600 bps	ON	OFF	ON
115,200 bps	OFF	ON	ON

Connection

1)Connect the AC adaptor to the I/O Box.

2)Connect the I/O Box to the PC with the RS-232C cross-type cable.

Start-up

1)Set the POWER switch to ON.

2)Make sure that the “READY POWER” lamp lights in green.

7