Casio PCRT-280, PCRT280 8. Basic Programing for QUICK START, 8-1Choose the tax rate from a preset tax table, Follow, Example 1:, Example 2:, these steps, Find your state

Part-1 QUICK START OPERATION

8. Basic Programing for QUICK START8-1 Choose the tax rate from a preset tax table.

A)Enter ?Xand press /.

B)Select your state.

C)Enter your four digit state number and then press/.

Find your state

SELECT YOUR STATE OR COUNTRY AND ENTER NUMBER THEN PRESS <HELP> KEY.

0101:ALABAMA

0201:ALASKA

5001:WISCONSIN

5101;WYOMING 5201:PUERTO RICO

?Z?Z/

your state number.	1)TURN MODE KEY TO PGM.
	2)3<SUBTOTAL>
	3)025<SUBTOTAL>
Follow	SET TABLE 1
	4)XXXX<CA>KEY.
these steps
	SET TABLE2(IF NECESSARY)
	5)XXXX<CA>KEY.
	6)<SUBTOTAL>
	XXXX IS DISTRICT NUMBER

8-2 Input the desired flat tax rate to the appropriate department key. (This procedure below programs flat tax rate only. If your tax table has break points, refer to page 25 of this manual.)

A)Turn the mode switch to PGM position.

B)Enter Zand press the key.

C)Press the ~key.

D)Enter tax rate. (Example: For 6% enter “6”, 5.75% enter “5.75”.)

E)Press the appropriate department key.

F)Repeat step B) and C) to set other department key.

G)Press the key to end tax programming.

Note: In case of setting the wrong tax rate to the key, please enter ?and press those department keys

above, and quit this procedure by pressing key, and start from the beginning of this procedure.

Please start with the department 2 key (taxable department). Department 1 key is initialized as non tax- able.

Example 1:

Set state tax 4% to department 2, 3 key.

~Start tax program.

4 Enter tax rate and press dept key.

4 Enter tax rate and press dept key. To end the setting.

Example 2:

Set state tax 5% to department 2 and 7% to department 3 key.

~Start tax program.

5 Enter tax rate and press dept key.

7 Enter tax rate and press dept key. To end the setting.

Note : For canadian tax system, see page 25 for more information.

E

12