Casio PX-120 Playing Back Built-inSongs, Playing Back All of the Built-inSongs, Playing Back a Specific Music Library Song

Playing Back Built-in Songs

MUSIC LIBRARY LR

￿/￿ TONE/SETTING

IMPORTANT!

•After you select a built-in song, it can take a number of seconds for the song data to be loaded. While the data is being loaded, the keyboard keys and button operations will be disabled. If you are playing something on the keyboard, the following operation will cause output to stop.

Playing Back All of the Built-in Songs

Your digital piano comes with a Music Library of 60 built-in tunes. You can play all 60 tunes in sequence, from beginning to end.

1. While holding down the MUSIC LIBRARY button, press the X/„ button.

•This will start repeat demo playback of the built-in songs in sequence, from 01 through 60.

•The MUSIC LIBRARY button and X/„ button lamps flash during playback.

•You can play along with a song on the keyboard as it is playing. The tone assigned to the keyboard is the one that is preset for the song that is playing.

•You can select a specific song during demo playback. For details, see step 2 under “Playing Back a Specific Music Library Song”.

2.Press the X/„ button again to stop built-in song play.

NOTE

•The tune selection and playback stop operations described above are the only operations that are possible during demo tune play.

Playing Back a Specific Music Library Song

1. Press the MUSIC LIBRARY button so the lamp above the button is lit.

•Each press of the button toggles between the upper lamp and lower lamp.

2.Find the song number of the song you want to play in the song list on page A-1.

3.To change to another song, hold down the TONE/SETTING button as you use the

SONG/RHYTHM SELECT keys to specify a song number.

•Each press of the + or – key raises or lowers the song number by 1.

•You can use the value input keys (0 to 9) to enter a specific song number. Be sure to input both digits.

Example: To select song 08, enter 0 and then 8.

E-13