Recording to and Playing Back from Song Memory

 

 

3 Press the START/STOP button.

To record to a track while playing

back from the other

• This starts playback of the track you selected.

After you finish recording, you can play back Track 1

• You can change the tempo setting as a track is

playing.

and Track 2 at the same time.

• As a track is playing, you can turn the

Example: To record to Track 2 while playing back the

metronome on or off using the METRONOME

button.

contents of Track 1

• You cannot change the tone setting during

 

 

1 Press the SONG MEMORY button once.

playback.

• Press the START/STOP button again to stop

• This causes the SONG MEMORY indicator

playback.

 

lamp to light.

 

2

Press the LEFT/TRACK 1 RIGHT/TRACK

 

2 button so LEFT/TRACK 1 indicator is lit.

3

Press the SONG MEMORY button again.

 

• This causes the LEFT/TRACK 1 indicator lamp

 

to flash. Press the LEFT/TRACK 1 RIGHT/

 

TRACK 2 button again, so it causes the RIGHT/

 

TRACK 2 indicator lamp to flash, which

 

indicates that the piano is standing by for

 

recording to Track 2.

 

• Select the tone and effects you want to use while

 

recording.

4

Press the START/STOP button or play

 

something on the keyboard to start

 

simultaneous playback from Track 1 and

 

recording to Track 2.

5

When you are finished, press the START/

 

STOP button again to stop recording.

Playing Back from Song Memory

1 Press the SONG MEMORY button once.

This causes the SONG MEMORY indicator lamp to light.

2 Use the LEFT/TRACK 1 RIGHT/TRACK 2

button to select the track you want to play back.

The indicator lamps above the button show the currently selected track.

• To play back Track 1, the LEFT/TRACK 1 indicator lamp should be lit.

• To play back Track 2, the RIGHT/TRACK 2 indicator lamp should be lit.

• To play back Track 1 and Track 2, both the indicator lamps should be lit.

To delete song memory data

IMPORTANT!

The procedure below deletes all of the data from the selected track. Note that the delete operation cannot be undone. Check to make sure you really do not need the data in Song Memory before you perform the following steps.

1Press the SONG MEMORY button twice.

This causes the SONG MEMORY indicator lamp to be flashing.

2Use the LEFT/TRACK 1 RIGHT/TRACK 2 button to select the track you want to delete.

The indicator lamps above the button show the currently selected track.

To delete Track 1, the LEFT/TRACK 1 indicator lamp should be flashing.

To delete Track 2, the RIGHT/TRACK 2 indicator lamp should be flashing.

3Hold down the SONG MEMORY button until its indicator lamp stops flashing and remains lit.

4Press the LEFT/TRACK 1 RIGHT/TRACK 2 button.

This deletes the contents of the track.

414A-E-023A

E-21