Casio QV-120 4. To, Using Auto Play, To set auto play speed, Important, speed setting, press the shutter button, 4. Press the shutter button, • If, Operation, Operation

			Playing Back Images			Operation
4. Press the shutter button.						Notes
• At this time the image is doubled in size. The portion that						• If	the page number is displayed in	the upper right corner of the
						screen when you perform a zoom operation, the number is replaced
appears on the screen is the center of the image.
						by a zoom area indicator (			). This indicator shows you what part
						of the image is currently enlarged on the display. You can turn the
						zoom area indicator on and off by pressing the DISP button.
						• Note that turning display of the zoom area indicator on and off dur-
						ing a zoom operation also affects the display of the image number
						in the Record Mode (page 27), and the memory page number in the
						Playback Mode (page 33).
5.Scroll the image on the screen.						Using Auto Play
						Auto play lets you automatically scroll through the camera’s memory
• Use [+] and [–] to scroll as shown in the illustration below.
						pages quickly and easily. You can specify the speed of the scroll.
6. To clear the zoomed display and return to the normal size						Important!
display, press any button besides [+], [–], or DISP.
						• The camera’s Auto Power Off function (page 16) does not function
Changing the Location of the Zoom Area						while an auto play operation is in progress. If you forget to turn the
						camera off, there is the danger that auto play will continue until bat-
						teries are dead. To avoid this, make sure that you stop the auto play
						operation and turn the camera off when you finish viewing.
	[+]			[+]
		[+]
						To start the auto play operation
						1. Enter the Playback Mode and turn on the camera.
	[+]	[+]		[+]
					2.		Start the auto play operation.
	[+]	[+]		[+]			• Hold down the [+] and [–] buttons until the message “AUTO
							PLAY START” appears.
• Pressing [–] moves the zoom area in the opposite direction.
			37		38

Playing Back Images Operation

2. Press MODE to enter the Auto Play Setting Mode.

• Be sure to press MODE while an image is stopped on the monitor, and not while images are changing.

3 seconds 3 seconds

•Auto play continues to loop through the memory pages. This

	means that when it reaches the last page, it starts again		Speed (number of
	from the first page.
3. Press the shutter button to stop the auto play operation.			seconds each
			image is displayed)
•	Pressing any button except the MODE button stops the auto	3. Use [+] (increase) and [–] (decrease) to change the current
	play operation.
		speed setting.

•Note that the buttons of the camera do not operate while a

page change operation is in progress. Make sure that an	•	You can set the speed within a range of 3 to 30 seconds, in
image is shown on the display when you press a button to		three-second increments.
stop the auto play operation.	4. To	start auto play using your newly set speed setting,
To set auto play speed	press the shutter button.
	•	To exit the auto play setting mode at any time, change the
Use the following procedure to specify how long each image remains
		function switch position to REC and then back to PLAY, or
on the display, within the range of 3 to 30 seconds.
		turn power off. Either of these methods cancels any settings
1. Perform steps 1 and 2 under “To start the auto play opera-
		you made and returns to the settings in effect when you en-
tion” on page 38 to start auto play.		tered the Auto Play Setting Mode.
	•	You can use auto play in combination with the multi-page
		display (page 34). First change to the multi-page format, and
		then perform the auto play operation (page 38).
	•	You cannot use auto play in combination with the multi-page
		display while protected pages are hidden (page 45).

3940