BASIC IMAGE RECORDING
Image Recording when the Battery is Low
To protect against unexpected loss of image data, images are recorded
cated as 
or lower. The message “Press 
to cancel save.” appears on the monitor screen during the save opera-
tion under this condition. As long as you do not press 
, the save operation continues and takes a few seconds to complete. Be sure to replace all four batteries as soon as possible after this message starts to appear.
Pressing 
while the “Press
to cancel save.” is on the monitor screen cancels the image save operation.
Using Zoom
Your camera is equipped with both optical zoom and digital zoom capabilities.
Using Optical Zoom
Optical zoom enlarges the image by changing the focal distance of the lens. The optical zoom range depends on your camera model.
•
•
•If you have a microdrive loaded in the camera, the above message appears whenever the battery level is indicated
as 
or lower.
•The message “Press 
to cancel save.” also appears momentarily during save operations in the Panorama Mode and Movie Mode. In this case, this message does not indicate that battery power is low.
1.Enter the REC mode.
2.Move the zoom slider to- wards T (telephoto) to zoom in on the subject, or W (wide- angle) to zoom out.
T (TELE): Telephoto
W (WIDE):
Zoom slider
W
T
REC
PLAY
W (WIDE) | T (TELE) |