Casio QV-70 Using Auto Play, Protecting Memory Pages, To start the auto play operation, To protect a page, Notes, Important, protect is displayed, 47), play, DISP, tion

Playing Back Images

Operation

Auto play lets you automatically scroll through the camera’s memory

pages quickly and easily. You can specify the speed of the scroll.

【＋】

Important!

• The camera’s Auto Power Off function (page 17) does not function

【＋】

while an auto play operation is in progress. If you forget to turn the

camera off, there is the danger that auto play will continue until bat-

teries are dead. To avoid this, make sure that you stop the auto play

operation and turn the camera off when you finish viewing.

【＋】

• Pressing [–] moves the zoom area in the opposite direction.

1. Enter the Playback Mode and turn on the camera.

Notes

• Hold down the [+] and [–] buttons until the message “AUTO

• If the page number is displayed in the upper

right corner of the

PLAY START” appears.

screen when you perform a zoom operation, the number is replaced

by a zoom area indicator. This indicator shows you what part of the

• There must be at least two images (two pages) recorded in

image is currently enlarged on the display. You can turn the zoom

memory to use the auto play operation. Otherwise, the

area indicator on and off by pressing the DISP button.

“AUTO PLAY START” message will not appear on the dis-

play.

Zoom area indicator

• Note that turning display of the zoom area indicator on and off dur-
ing a zoom operation also affects the display of the image number	• After about one second, this message disappears and the
in the Record Mode (page 27), and the memory page number in the	auto play operation starts.
Playback Mode (page 35).
41	42

Playing Back Images

Operation

		Protecting Memory Pages
		You can protect specific memory pages to ensure that they are not
		accidently deleted.
3 seconds	3 seconds	To protect a page

•Auto play continues to loop through the memory pages. This

means that when it reaches the last page, it starts again		• Slide the function switch to the PLAY position.

from the first page.		• Slide the POWER switch in the direction indicated by the
3. Press the shutter button to stop the auto play operation.		arrow.
• Pressing any button	stops the	• If the page number is not shown in
• Pressing any button	stops the	the upper right of the page, press
auto play operation.	+	the upper right of the page, press		/PROTECT	ZOOM		DISP	MODE
auto play operation.		DISP.						+
	–	DISP.						+
• Note that the buttons of the cam-
era do not operate while a page
change operation is in	progress.					Page number
Make sure that an image is shown						Page number
Make sure that an image is shown
on the display when you press a
button to stop the auto play opera-
tion.
• You can also use auto play with the multi-page display.
Change to the multi-page display first, and then start auto
play.		2. Scroll through the memory pages until the one you want to

		protect is displayed.
		• Press [+] to display the	next	DISP	MODE
		• Press [+] to display the	next			+
		memory page or [–] to display the				+
		memory page or [–] to display the
		previous memory page.		ON/OFF		–
				POWER
		• You cannot protect or unprotect
		• You cannot protect or unprotect
		memory pages while protected
		memory pages are hidden (page
		47).
	43	44