Operation Guide 3135 3206

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

•In the Timekeeping Mode, an indicator moves along the ring around the display as seconds advance.

•The tide graph shows tidal movements for the current date in accordance with the current time as kept in the Timekeeping Mode.

•The Moon phase indicator shows the current Moon phase in accordance with the current date as kept in the Timekeeping Mode.

•In the Timekeeping Mode, you can press E to toggle the display contents as shown below.

Day of the Week Screen

 

Barometric Pressure

Day of week

 

 

 

Graph Screen

 

 

 

 

 

PM indicator

 

 

 

Barometric

 

 

 

 

 

pressure

 

 

 

 

 

graph

 

 

 

 

 

 

 

 

▲

 

Press E.

 

 

 

 

 

▲

 

 

 

 

 

 

 

 

 

 

 

Hour :

 

 

 

Hour :

 

Second

 

Minute

Second

Minute

 

 

 

 

Month – Day

Month – Day

Read This Before You Set the Time and Date!

This watch is preset with a number of city codes, each of which represents the time zone where that city is located. When setting the time, it is important that you first select the correct city code for your Home City (the city where

To change the Daylight Saving Time (summer time) setting

DST indicator

1.

In the Timekeeping Mode, hold down E until

 

the city code starts to flash, which indicates

 

 

 

 

 

 

 

 

 

 

ll

 

 

 

2.

the setting screen.

 

 

 

l

l l l l

l

Press D and the DST setting screen appears.

 

 

 

l

 

ll

 

 

 

 

 

 

 

 

 

 

l

lll

l

 

l

3.

Use A to cycle through the DST settings in

l

 

 

l

l l l

l

ll

 

 

l

 

 

 

 

 

 

 

 

 

 

 

ll ll

 

 

 

 

 

the sequence shown below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DST off (

)

 

 

 

DST on ( )

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.When the setting you want is selected, press E to exit the setting screen.

•The DST indicator appears to indicate that Daylight Saving Time is turned on.

Digital Compass

A built-in bearing sensor detects magnetic north and indicates one of 16 directions on the display. Direction readings are performed in the Digital Compass Mode.

•You can calibrate the bearing sensor if you suspect the direction reading is incorrect.

•See “Using the Digital Compass While Mountain Climbing or Hiking” for some real-life examples of how to use this feature.

To enter and exit the Digital Compass Mode

you normally use the watch). If your location is not included in the preset city codes, select the preset city code that is in the same time zone as your location.

•Note that all of the times for the World Time Mode city codes are displayed in accordance with the time and date settings you configure in the Timekeeping Mode.

To set the time and date

1.In the Timekeeping Mode, hold down E until the city code starts to flash, which indicates the setting screen.

2.Use A and C to select the city code you want.

•Make sure you select your Home City code before changing any other setting.

•For full information on city codes, see the “City Code Table”.

3.Press D to move the flashing in the sequence shown below to select the other settings.

12 o’clock position

Two seconds

Current time

▲

1.While in the Timekeeping Mode or in any of the other sensor modes, press C to enter the Digital Compass Mode.

•At this time, the watch will start a Digital Compass operation. After about two seconds, letters appear on the display to indicate the direction that the 12 o’clock position of the watch is pointing.

•The direction reading on the display is updated each second for up to 20 seconds, after which measurement stops automatically.

2.Press D to return to the Timekeeping Mode.

City Code

 

 

 

 

 

 

12/24-Hour

 

 

Second

 

 

Hour

 

 

 

 

 

Minute

 

 

 

 

 

 

DST

 

 

 

 

 

 

 

 

 

 

 

 

 

Year

 

 

 

Format

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Barometric

 

 

Altitude Unit

 

 

Temperature

 

 

Power

 

 

 

 

 

Day

 

 

 

Month

Pressure Unit

 

 

 

 

Unit

 

 

 

 

 

Saving

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To take a direction reading

• The following steps explain how to configure timekeeping settings only.

4.When the timekeeping setting you want to change is flashing, use A and/ or C to change it as described below.

Screen

To do this:

Do this:

 

Change the city code

Use A (east) and

 

 

 

C(west).

 

Toggle between Daylight Saving

Press A.

 

Time (

) and Standard Time

 

 

(

).

 

 

Toggle between 12-hour (12H)

Press A.

 

and 24-hour (24H) timekeeping.

 

 

Reset the seconds to 00

Press A.

 

 

 

 

Change the hour or minute

Use A (+) and C (–).

Change the year

North pointer

12 o’clock position

Direction indicator

Angle value (in degrees)

270°

W

NW

NNW

0°

 

 

W

NW

 

 

 

 

 

 

 

 

 

 

N

 

 

 

 

W

 

 

 

N

 

S

 

 

 

 

N

 

W

 

 

 

 

E

 

 

 

 

 

 

 

 

SW

 

 

 

 

 

 

 

NE

W

 

 

 

E

N

E

S

 

 

 

 

 

S

 

 

 

 

 

 

 

S

 

 

 

E

 

 

180°

SSE

SE

E

90°

 

 

 

ES

 

 

 

1.While the watch is in the Digital Compass Mode, place it on a flat surface, or if you are wearing the watch, make sure that your wrist is horizontal (in relation to the horizon).

2.Point the 12 o’clock position of the watch in the direction you want to measure.

3.Press C to start a Digital Compass measurement operation.

•After about two seconds, the direction that the 12 o’clock position of the watch is pointing appears on the display.

•Also, four pointers appear to indicate magnetic north, south, east, and west.

•After the first reading is obtained, the watch continues to take direction readings automatically each second, for up to 20 seconds.

Change the month or day

5. Press E to exit the setting screen.

Note

•You also need to enter the Timekeeping Mode in order to configure the following settings.

Power saving on/off (“To turn Power Saving on and off”) Temperature, barometric pressure, and altitude units (“To select the temperature, barometric pressure, and altitude units”)

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.

•While the watch is taking compass readings, it displays a direction angle, a direction indicator, and four direction pointers, all of which change dynamically when the watch is moved. The direction angle, direction indicator and direction pointers all disappear from the display after the compass reading operation is complete. Use the direction indicators imprinted on the bezel to record the indicated direction. For details, see “Using the Digital Compass While Mountain Climbing or Hiking”.

Note

• Note that taking a measurement while the watch is not horizontal (in relation to the horizon) can result in large measurement error.

•The margin of error for the angle value and the direction indicator is ±11 degrees. If the indicated direction is northwest (NW) and 315 degrees, for example, the actual direction can be anywhere from 304 to 326 degrees.

2