Part-1 QUICK START OPERATION

8. Basic Programming for QUICK START

Mode Switch

REG CAL X Z OFF

RF

PGM

Procedure

Purpose

1. To select the date format and monetary mode (if necessary)

You can select the date format and monetary mode after initialization depending on the requirements in your area. Default date format is Day/ Month/ Year and default monetary mode is add 2.

C

 

Date Format Selections

Select date format

P3 appears in mode display

 

Year/ Month/ Day

?

?ZXX

A

Day/ Month/ Year

Z

and

Program set code No.

 

Month/ Day/ Year

X

monetary mode

X?p

Monetary Mode Selections

 

Select number from list A

B

Add 0

(0.)

?

 

Select number from list B

Add 1

(0.0)

Z

 

(To end the setting)

 

Add 2

(0.00)

X

 

2. Input the desired add-in tax rate to the appropriate department key.

(This procedure below programs add-in tax rate only. If you want to set add-on tax or tax with special rounding, refer to page 27 of this manual.)

A)Enter 1and press the key.

B)Press the ~key.

C)Enter tax rate. (Example: For 6% enter “6”, 5.75% enter “5.75”.)

D)Press the appropriate department key.

E)Repeat step B) and C) to set other department key.

F)Press the key to end tax programming.

Note: In case of setting the wrong tax rate to the key, please enter ?and press

key, Setting the tax rates

those department keys above, and quit this procedure by pressing

and start from the beginning of this procedure.

 

Example :

Set add-in tax 8% to department 2, 3, 15% to department 4 key.

~Start tax program.

8Enter tax rate and press dept key.

8 Enter tax rate and press dept key.

15Enter tax rate and press dept key. To end the setting.

E

12