IMPORTANT

 

SAFETY INSTRUCTIONS

I

 

INSTALLATION INSTRUCTIONS

1.Never install telephone wiring during a lightning storm.

2.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

3.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

4.Use caution when installing or modifying telephone lines.

SAFETY PRECAUTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4.Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.

5.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.

6.Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in an enclosed environment unless proper ventilation is provided.

7.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by animals or persons walking on it.

8.Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.

9.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

10.To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified serviceperson when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect re-assembly can cause electric shock when the appliance is subsequently used.

11.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power supply cord or plug is damaged or frayed.

B.If liquid has been spilled into the product.

C.If the product has been exposed to rain or water.

D.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

E.If the product has been dropped or the cabinet has been damaged.

F.If the product exhibits a distinct change in performance.

12.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

13.Do not use the telephone to report a gas leak while near the leak.

SAVE THESE INSTRUCTIONS

 

 

REMOTE OPERATION

J

 

 

 

Remote operation allows you to access the TI-310

 

 

 

 

 

 

 

 

 

 

 

 

CHANGE YOUR

 

 

REMOTE ANSWER

 

 

 

 

from any cellular or touch-tone phone. The 3-digit

 

 

 

 

 

 

 

 

Remote Access Code is printed on the bottom of

 

 

GREETING

 

 

OFF/ON

 

 

 

 

the unit. To enable remote operation, you may

 

 

 

 

 

 

 

 

need to press and hold each remote access

 

 

(OPTION 3)

 

 

(OPTION 7 & 8)

 

 

 

 

number for 2 seconds. If you intend to call from

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rotary or pulse telephones, order the Touchtone

 

 

If your TI-310 is currently playing back

 

 

Press 8 on your keypad after hearing

 

 

 

 

Dialer on the ACCESSORY page.

 

 

messages, press 1 on your keypad to

 

 

End of messages.” to turn the

 

 

 

 

 

 

1 pause playback.

 

1 answering machine off. Upon exiting

 

 

 

 

LISTENING TO

 

 

 

 

 

remote operation, the unit will be turned

 

 

 

 

 

 

 

 

 

off and no further messages will be

 

 

 

 

 

 

Press 3 on your telephone keypad, a

 

 

 

 

 

 

MESSAGES

 

 

 

 

recorded.

 

 

 

 

 

 

beep will be heard, begin recording your

 

 

 

 

 

 

 

(OPTION 1)

 

2 new greeting.

 

 

 

 

 

 

 

 

 

 

In the event you accidentally turned your

 

 

 

 

 

 

 

 

 

 

answering machine off, press 7 on your

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After the access code has been entered,

 

 

Press 3 on your telephone keypad when

 

2 keypad to turn the unit back on.

 

 

 

 

1 messages will automatically be played.

 

 

finished speaking. Your new greeting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 will play automatically.

 

 

EXITING REMOTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:

 

 

 

OPERATION

 

 

 

 

PAUSING MESSAGES

 

 

 

 

 

 

 

 

■ There is a one minute maximum for recording your

 

 

 

 

 

 

 

 

greeting through remote operation.

 

 

(OPTION 9)

 

 

 

 

 

 

 

 

 

 

 

 

During playback of the message you want

 

 

SKIP BACKWARD

 

 

 

 

 

 

 

 

 

 

 

Press 9 on your keypad at any time

 

 

 

 

paused, press 1 on your keypad.

 

 

 

 

 

 

 

 

1 Messages will be paused for up to one

 

 

(OPTION 4)

 

1

during remote operation to exit.

 

 

 

 

minute before disconnecting. To resume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

playback, press 1 again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MESSAGE RETRIEVAL

 

 

 

 

 

 

Press 4 on your keypad to skip back to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 the previous message.

 

 

WHEN MEMORY

 

 

 

 

ERASE MESSAGES

 

 

 

 

 

 

 

 

 

 

 

 

IS FULL

 

 

 

 

 

 

REPEAT MESSAGE

 

 

 

 

 

 

(OPTION 2)

 

 

 

If the TI-310’s memory is full, you will hear three

 

 

 

 

 

 

 

(OPTION 5)

 

short beeps followed by, “Memory full.” To retrieve

 

 

 

 

 

 

 

 

 

 

 

During playback of the message you want

 

 

 

messages remotely when the TI-310’s memory is

 

 

 

 

 

 

 

 

 

 

 

 

erased, press 2 on your touchtone keypad.

 

 

Press 5 on your keypad to repeat the

 

full:

 

 

 

 

 

1 To confirm deletion of the message, you

 

1

 

 

 

 

 

 

 

 

current message.

 

 

Enter your 3-DIGIT ACCESS CODE

 

 

 

 

will hear a beep.

 

 

 

 

 

 

 

 

 

 

 

1as the greeting plays.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To erase all messages, press 2 after

 

 

SKIP FORWARD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

hearing “End of Messages.” You will

 

 

 

 

 

After listening to messages, you may

 

 

 

 

2 hear a beep and all messages will be

 

 

(OPTION 6)

 

 

 

 

 

 

 

 

 

 

press 2 on the keypad to erase all

 

 

 

 

erased.

 

 

 

 

2messages and allow callers to leave new

 

 

 

 

 

 

 

Press 6 on you keypad to skip forward

 

 

 

 

 

 

 

 

 

 

messages.

 

 

 

 

 

 

1 to the next message.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TROUBLESHOOTING

K

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recorded messages are cut off.

 

 

After recording a new greeting from remote

 

 

QUESTIONS?

 

 

 

 

The TI-310 is designed to disconnect from the

operation, the unit does not respond.

 

 

 

 

 

 

 

HERE’S HOW TO REACH US

 

 

 

 

line after a caller stops talking. Calls may be cut

After you record your new greeting, you must

 

 

 

 

 

off if a 5 second pause is detected, if the caller

press 3 again on your keypad to end the

 

By Phone:

 

 

 

 

does not speak loud enough or if a message is

recording. If 3 is not pressed, the unit will

 

 

 

 

 

less than two seconds.

suspend remote operation access for 13

 

HELPLINE: (310) 320-9810, Monday - Friday,

 

 

 

 

 

 

 

minutes. You will be able to retrieve your

 

 

8 a.m. to 4:45 p.m., PST

 

 

 

 

 

 

messages after the 13 minutes.

 

AUTHORIZED FACTORY SERVICE CENTER:

 

 

 

 

The TI-310 does not respond when you enter

 

 

 

 

 

your remote access code while the greeting is

 

 

 

 

 

Phone Masters Repair Center

 

 

 

 

playing

 

A greeting was recorded but the default

 

 

(714) 373-4233, Monday - Friday,

 

 

 

 

Try re-entering the correct code after the beep.

 

greeting plays.

 

 

8 a.m. to 5 p.m., PST

 

 

 

 

Press each number of the access code for at

Check the length of the recorded greeting. In

 

PARTS ORDERS USING A CREDIT CARD:

 

 

 

 

least two seconds.

order for the TI-310 to accept a greeting, it must

 

 

Pacific Coast Parts Distributors, Inc.

 

 

 

 

 

 

 

be at least two seconds in length or the unit will

 

 

(800) 421-5080 or (310) 515-0207,

 

 

 

 

 

 

 

default to the pre-recorded greeting.

 

 

Monday - Friday, 8 a.m. to 4:30 p.m., PST

 

 

 

 

Between messages there is an operator

 

 

 

 

 

 

 

 

 

 

 

On-line:

 

 

 

 

recording or a beep and dial tone.

 

 

 

 

 

 

 

 

 

 

After several attempts the TI-310 will not

 

CUSTOMER RELATIONS:

 

 

 

 

The caller has hung up without leaving a

 

 

 

 

message. A shorter greeting will reduce the

operate properly.

 

 

WEBSITE: www.casiocomm.com

 

 

 

 

frequency of these recordings.

To reset the TI-310, unplug the AC ADAPTER

 

 

E-MAIL:cpmicust@casio.com

 

 

 

 

 

 

 

PLUG from the back of the TI-310 for 10

AUTHORIZED FACTORY SERVICE CENTER:

 

 

 

 

You have more than one telephone number

 

seconds and remove the battery (if one is

 

 

WEBSITE: www.members.home.net/

 

 

 

 

and are experiencing difficulty.

 

installed). The greeting, incoming messages

 

 

skelly1/PM1.htm

 

 

 

 

See MULTI-LINE INSTALLATION.

 

and time/day stamp will be lost. Re-record the

 

 

E-MAIL:phonemasters@hotmail.com

 

 

 

 

 

 

 

greetings and set the time and day.

PARTS AND ACCESSORIES:

 

 

 

 

 

 

 

 

 

 

 

WEBSITE: www.pacparts.com

 

 

 

 

There is no sound during playback.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E-MAIL:orders@pacparts.com

 

 

 

 

Check and adjust the VOLUME.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTHORIZED FACTORY SERVICE CENTER

 

 

 

 

The unit does not automatically stop playing

 

 

 

 

For repairs, please bring or send your unit to:

 

 

 

 

the greeting or recording a message when an

 

 

 

 

Phone Masters Repair Center

 

 

 

 

extension phone is picked up.

 

 

 

 

11899 Valley View Street

 

 

 

 

 

 

 

 

 

Garden Grove, CA 92845

 

 

 

 

Briefly press and release the HOOK-SWITCHon

 

 

 

 

 

 

 

 

1.

Pack your product securely in a sturdy

 

 

 

 

the extension phone.

 

 

 

 

 

 

 

 

 

 

 

 

 

shipping box.

 

 

 

 

 

 

 

Design and specifications are subject to

 

2.

Include a clear and specific explanation of

 

 

 

 

The unit is not responding when keys are

 

 

 

 

 

 

 

change without notice.

 

 

 

the problem.

 

 

 

 

pressed.

 

 

 

 

 

 

 

 

 

 

 

 

3. Include your name, street address (sorry,

 

 

 

 

The TI-310 has approximately a 5 second

CASIO COMMUNICATIONS, INC.

 

 

 

 

 

 

 

 

no P.O. box), and daytime phone number.

 

 

 

 

initialization process. Once the unit is plugged

20665 Manhattan Place

 

 

 

 

 

 

 

 

4. Provide a legible photocopy of the dated

 

 

 

 

in, the unit requires 5 seconds in which it runs

Torrance, CA 90501-1827

 

 

 

 

 

 

 

 

store receipt for one-year warranty

 

 

 

 

its internal diagnostic tests. The MESSAGES

Internet Website:

 

 

 

 

 

 

 

 

 

 

purposes.

 

 

 

 

INDICATOR will flash when the unit is ready for

 

 

 

 

 

 

 

http://www.casiocomm.com

 

 

 

Register on-line at www.casiocomm.com

 

 

 

 

operation.

 

 

 

 

 

 

 

M2S1 3/00

 

 

 

or fill-out and return the enclosed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Printed in Malaysia

 

 

 

product registration card.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EASY TO USE

OWNER'S GUIDE

TI-310

Telephone with

 

Digital Answering Machine

 

Turn over for

 

installation

 

instructions

FCC REQUIREMENTS

REFERENCIA RÁPIDA M

WALL MOUNTING

N

LIMITED WARRANTY

O

INSTALLATION

A

USER INSTRUCTIONS

L

1. This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label

CONEXIÓN DEL TI-310

1 ENCHUFE el cordón de teléfono del

GRABACIÓN DE

MENSAJES DE SALIDA

The TI-310 can easily be wall mounted by following these instructions. If you have a standard telephone wall mounting bracket, begin with step 2.

NOTE:

Purchase wood screws, round head, brass, size #10, 1 1/4 inches in length.

IMPORTANT! SALES SLIP OR EVIDENCE OF PURCHASE DATE REQUIRED

This limited warranty gives you specific legal rights; you may also have other rights which vary from state to state. The limited warranty is extended only to the original consumer of a CASIO COMMUNICATIONS product and is valid only with respect to consumers within the United States of America and Canada. Should this product prove defective by reason of improper workmanship or material during the period of one (1) year from the date of original purchase,

Install a 9 volt (9V) battery to protect your greeting, incoming messages and time/day setting during power failure. During a power failure, this information is saved until the battery is depleted.

 

that contains, among other information, the FCC registration number and Ringer Equivalence

 

Number (REN) for this equipment. If requested, provide this information to your telephone company.

2.

The REN is useful to determine the quantity of devices you may connect to your telephone line and

 

still have all of those devices ring when your number is called. In most, but not all areas, the sum of

 

the RENs of all devices should not exceed five (5.0). To be certain of the number of devices you may

 

connect to your line, as determined by the REN, you should call your local telephone company to

 

determine the maximum REN for your calling area.

3.

If your answering machine causes harm to the telephone network, the telephone company may

 

discontinue your service temporarily. If possible, they will notify you in advance. But if advance

 

notice is not practical, you will be notified as soon as possible. You will be advised of your right to

 

file a complaint with the FCC.

4.

Your telephone company may make changes in its facilities, equipment, operations, or procedures

 

that could affect the proper operation of your equipment. If they do, you will be given advance notice

 

so as to give you an opportunity to maintain uninterrupted service.

5.

If there is a problem with this unit, the telephone company may ask you to disconnect this

 

equipment from the network until the problem has been corrected or you are sure that the

 

equipment is not malfunctioning.

6.

Repairs can only be made by the manufacturer or an authorized service agency. Unauthorized

 

repairs void registration and warranty. Contact seller or manufacturer for details of permissible user-

 

performed routine repairs, and where and how to have other than routine repairs made.

7.

This equipment may not be used on coin service provided by the telephone company. Connection to

 

party lines is subject to state tariffs. (Contact your state public utility commission or corporation

 

commission for information.)

Jack: RJ11 Ringer Equivalence: See bottom/underside of the TI-310 base unit. CASIO COMMUNICATIONS, Inc. 20665 Manhattan Place, Torrance, CA 90501

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes made by the user not approved by CASIO COMMUNICATIONS can void the user’s authority to operate the equipment. This product is hearing aid compatible.

TI-310 en un enchufe de pared de teléfono.

CONECTE el enchufe del adaptador

2 de CA en el tomacorriente para adaptador de CA que hay en la parte de atrás del TI-310. ENGANCHE el cordón a través del sujetador de cordón del adaptador de CA para evitar una desconexión accidental.

NOTA:

La desconexión del adaptador de CA de la parte de atrás de la unidad hará que la TI-310 borre todos los mensajes recibidos, mensajes de salida, números de marcación automática, hora y fecha.

3 ENCHUFE el cordón extensible del auricular en el auricular y en el lado izquierdo del TI-310.

4 ENCHUFE el adaptador de CA en un tomacorriente de pared eléctrico. Después de la señal acústica, los indicadores luminosos destellarán. Una vez que los indicadores luminosos comiencen a destellar, se puede grabar un mensaje de salida.

5 INSTALE una batería de 9 voltios

(9V) para proteger los mensajes de salida, los mensajes recibidos y las configuraciones de hora y día.

Durante un corte de suministro eléctrico, esta información se guarda hasta que la batería se agote.

Grabe un mensaje de salida personalizado de hasta 1 minuto de duración para responder a las llamadas.

Asegúrese de que los indicadores

1 luminosos están encendidos o destellando. El mensaje de salida debe ser de más de dos segundos o la unidad utilizará el mensaje de salida predeterminado.

2 Fije el control de volumen (VOLUME) en un nivel que usted pueda oír.

NOTA:

El nivel de sonido se ajusta automáticamente cuando el mensaje de salida se transmite por la línea de teléfono.

3 Oprima el botón de grabación de mensaje de salida (GREETING RECORD) y espere que se encienda el indicador de grabación (RECORD INDICATOR). Oirá una señal acústica.

NOTA:

Si la memoria del TI-310 está llena, reproduzca y borre todos los mensajes antes de grabar su mensaje de salida

4 Comience a hablar a aproximadamente

7 plg del micrófono.

5 Cuando termine de hablar, oprima el botón de grabación de mensaje de salida (GREETING RECORD) nuevamente para dejar de grabar. Si no

oprime el botón de grabación de mensaje de salida (GREETING RECORD), la unidad dejará

automáticamente de grabar pasado un minuto.

6 La TI-310 reproducirá automáticamente el mensaje de salida.

Mount screws into wall. Use the

1 template (right) to space screws correctly.

2 Guide the telephone cord through the right cord holder on the unit’s bottom.

Tightly coil the telephone cord

3 around the four guides on the in-side of the wall mounting bracket.

4 Pull the telephone cord through the center opening on the wall mounting bracket.

5 Guide the AC Adapter through the left cord holder on the bottom of the unit.

6 Tightly coil the AC Adapter cord around the four guides on the in- side of the wall mounting bracket.

7 Direct the AC Adapter cord through the opening in the side of the wall mounting bracket.

T

E

M

P

L

A

T

E

8 Snap the wall mounting bracket into the back of the TI-310.

9 Plug the AC Adapter into a wall outlet and the telephone cord into a wall jack.

10Remove the handset retainer clip located above the speaker grill in the handset cradle and rotate the clip 180 degrees. Replace the clip. This secures the handset.

CASIO COMMUNICATIONS will repair or, at its option, replace the product without charge for parts or labor. If CASIO COMMUNICATIONS elects to replace the product, such replacement may be accomplished with a factory-reconditioned unit. This limited warranty does not apply: (a) to any product damaged by accident, misuse, improper line voltage, lightning, fire, water, or other acts of nature, (b) if the product is altered or repaired by anyone other than CASIO COMMUNICATIONS, INC. or one of its authorized warranty stations or (c) if the FCC-approved connector plugs are removed. This limited warranty does not cover broken or marred cabinets.

Except to the extent prohibited by applicable law, all implied warranties made by CASIO COMMUNICATIONS in connection with this product are limited in duration to a period of one (1) year from the date of original purchase, and no warranties, whether expressed or implied, shall apply to this product after said period.

Should this product prove defective in workmanship or material, the consumer’s sole remedies shall be such repair or replacement as is herein-above provided. Under no circumstances shall CASIO COMMUNICATIONS be liable for any loss or damage, direct, consequential, or incidental arising out of the use of or inability to use this product.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply to you.

In order to obtain warranty service, you must provide evidence of purchase date. For your convenience, keep the dealer’s dated bill of sale or delivery ticket as evidence of the purchase date. See Troubleshooting section above for details. Before returning or exchanging your product, call the CASIO COMMUNICATIONS Helpline at (310) 320-9810.

ACCESSORIES

P

To order accessories for your TI-310, simply cut out this order form, fill in the appropriate information and send it with payment (check, money order or credit card information) to:

Pacific Coast Parts Distributors, Inc., 15024 Staff Court, Gardena, CA 90248. For parts orders using a

 

credit card:

(800) 421-5080or (310) 515-0207, Monday - Friday, 8 a.m. to 4:30 p.m., PST.

 

 

To order on-line: www.pacparts.com

E-MAIL:orders@pacparts.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part No.

Price

Qty.

Total

Lightning Arrestor - Recommended for areas prone to electrical storms.

2700140

$19.95

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AC Adapter - For Model TI-310.

 

 

 

 

 

 

 

1601086

$13.50

 

 

 

 

 

 

 

 

Touchtone Dialer - Activates the beeperless remote operation.

 

2001018

$19.95

 

 

 

 

 

 

 

 

 

 

 

Enclosed is my check/money order for the total amount.

Subtotal

 

 

Please charge my credit card.

 

 

 

 

 

 

CA residents add applicable sales tax

 

 

 

VISA

 

MasterCard

 

 

 

 

 

 

All orders add shipping and handling

$3.50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Total

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Card No.Expiration Date

Name ______________________________________________________________________________

Street Address _______________________________________________________________________

City _________________________________________ State __________ Zip Code _______________

Signature ___________________________________________ Telephone _______________________

We do not accept C.O.D. orders. Allow 15 working days for delivery. Prices subject to change without notice. Returns subject to 20% restocking charge upon approval.

1 Turn the TI-310 over and remove the battery cover. Install a 9V alkaline battery. Make sure the battery is connected correctly. Replace the cover.

2

PLUG the TI-310’s telephone cord

 

 

into a telephone wall jack.

 

 

USE ONLY WITH ADAPTOR

 

PULSE

TONE

OFF LO

HI

TS 2

4

MODEL M/N-75

 

 

 

RING VOL.

RINGS

 

 

 

 

 

 

3 CONNECT the AC Adapter Plug into the AC Adapter Outlet on the back of the TI-310. LOOP the cord through the AC Adapter Cord Holder to prevent accidental disconnection.

NOTE:

Disconnection of the AC Adapter from the back of the unit will cause the TI-310 to erase all recorded messages, greetings, autodial numbers, the time and date.

4 PLUG the coiled handset cord into the handset and into the left side of the TI-310.

5 PLUG the AC Adapter into an electrical wall outlet. After the beep the LEDs will flash. Once the LEDs start flashing, you may record your greeting.

4336-920-0-01

Page 1
Image 1
Casio TI-310 important safety instructions Listening to, Exiting Remote Operation, Skip Backward, Is Full, Skip Forward