Casio WK-1600, WK-1630, WK-1800 Punch-inRecording, Press the, 1. Press the SONG button once, 1. Press the SONG button once, 5. Make any tone setting you want

CHANNEL

SONG

FULL RANGE

CHORD

MAX

FINGERED

CASIO CHORD

RECORD

MIN

/NO

/YESS

EXTERNAL

CH 1

CH 2

CH 3

CH 4

CH 5 CH 6

CH 7

CH 8

CH 9

CH 10

CH 11

CH 12

CH 13

CH 14

CH 15

CH 16

MAIN MANU/

DELETE

[+]/[–]

SONG

PATTERN

INTERNAL

UPPER1

UPPER2

LOWER1

LOWER2

ACC VOL. CHORD1

CHORD2

CHORD3

BASS

RHYTHM

TR1

TR2

TR3

TR4

TR5

TR6

CHANNEL VOLUME:

SUB MANU/

CHANNEL SELECT:

BANK

STORE

START/STOP

ENTER

To use real-time recording in Tracks 2 through 6

❚ NOTE ❚

If you are performing real-time recording in Tracks 2 through 6 immediately after you finished real-time recording in Track 1, skip steps 1 and 2 of the following procedure.

1. Press the SONG button once.

•This causes the indicator lamp above the SONG button to light.

2.Select the user song area to which you want to record.

•Use [+] and [–] to select User Song Area 0 (SG0) or User Song Area 1 (SG1).

•Change Mixer settings for the channel if you want. The Mix- er settings you make for the channel are copied to applica- ble track during recording.

3.Press the RECORD button to enter record standby.

•The REC indicator appears, and the frame around the cur- rently selected channel (track) flashes on the display.

T UN E 1

•Channels CH 11 through CH 16 of the level meter show which tracks already contain recorded data. See “Level Meter Dur- ing Record Operations” on page E-44 for details on how to read the level meter.

4.Select the track to which you want to record.

•Use CHANNEL buttons CH12 (Track 2) through CH16 (Track 6) to select the track you want.

CH 11	CH 12	CH 13	CH 14	CH 15	CH 16
TR1	TR2	TR3	TR4	TR5	TR6

5. Make any tone setting you want.6. Press the START/STOP button to start recording.

•At this time the REC indicator stops flashing.

•The metronome normally sounds during recording. If you want to turn off the metronome, use the procedure under “Metronome Setting (1)” on page E-46.

7.Play the notes you want to record on the keyboard.

8. After you are finished, press START/STOP to stop re- cording.

•The REC indicator disappears from the display when record- ing is stopped.

9.At this point you can repeat steps 3 through 8 for oth- er tracks, if you want.

Punch-in Recording

Note that the procedure you use for Track 1 is different from that for Tracks 2 through 6.

PREPARATION

•Determine the tones that you want to use.

•Set the tempo that you want to use during recording.

❚ NOTES ❚

•You can change tone and rhythm while recording is in progress.

•The previously recorded rhythm pattern is automatically selected at first, but you can change the rhythm during punch-in recording. Changing the rhythm during punch-in recording, however, may cause the metro- nome display and rhythm beat to be out of synch with the rhythm that is playing.

•The tempo you use for recording does not affect the tempo of the play- back. This means you can record at a very slow tempo for easy play, and then speed up the tempo for playback.

To use punch-in recording in Track 1

1. Press the SONG button once.

•This causes the indicator lamp above the SONG button to light.

2.Select the user song area that contains the song whose contents you want to change using punch-in record- ing.

•Use [+] and [–] to select User Song Area 0 (SG0) or User Song Area 1 (SG1).

TUNE 1