Safety Precautions
●Disposal by burning
-burning it. Doing so can cause an explosion, which creates the risk of fire and personal injury.Never try to dispose of the projector by
●Looking into the lens or vents while light source unit is on
-while light source unit is on. The strong light emitted by the projector creates the risk of eye damage.Never look directly into the lens or vents
●Blocking the vents
Never allow the vents to become - blocked. Doing so causes internal heat
build up, which creates the risk of fire and breakdown of the projector. Touching the projector while it is hot creates the risk of burn injury. Make sure that you always observe the following precautions.
•Allow at least 30cm (11.8 inches) between the projector and walls.
•Do not insert the projector into any space where air circulation is poor.
•Never cover the projector with a blanket or any similar item.
•Locate the projector on a firm, flat surface during use. Never use the projector while it is on a carpet, blanket, towel, seat cushion, or other pliable surface.
•Never stand the projector up on either end during use.
●Exhaust vents
The exhaust vents become very hot while the projector is running. Never touch them. Doing so creates the risk of burn injury. The areas near the exhaust vents also become quite hot. Never locate objects made of plastic or other
●Lens cover
Be sure to remove the lens cover before turning on the projector. Never leave the lens cover attached while the projector is in use.
●Location
Never locate the projector in any of the following types of locations. Doing so creates the risk of fire and electric shock.
•Near an area subject to strong vibration
•An area subject to large amounts of moisture or dust
•In a kitchen or other area exposed to oil smoke
•Near a heater, on a heated carpet, or in an area exposed to direct sunlight
•An area subject to temperature extremes (Operating temperature range is 5°C to 35°C (41°F to 95°F)).
●Heavy objects
Never place heavy objects on the projector or climb on top of the projector. Doing so creates the risk of fire and electric shock.
●Projector cabinet
’Doingshock.so creates the risk of electricNever open the projector’s cabinet.
●Cleaning
$turn it off and unplug it from the power outlet. Failure to do so creates the risk of electric shock.Before cleaning the projector, be sure to
●Water
Never locate the projector in a bathroom or anywhere else there is the chance that it will be splashed with water.
●Unstable location
-surface or on a high shelf. Doing so can cause it to fall, creating the risk of personal injury.Never place the projector on an unstable