Indicator/Error Message | Description and Required Action | ||
POWER | : Amber flashing J | Power has turned off automatically due to internal overheating. Perform | |
| Amber steady | the following steps. | |
LIGHT | : – | 1 Check for any blocking of the projector’s intake vents and exhaust | |
vents, and make sure that there is sufficient space around the | |||
TEMP | : – | ||
projector. See “Setup Precautions” (page 10). | |||
Message | : Internal temperature is too | 2 If there is dust accumulated around the intake vents and/or exhaust | |
| high. The projector will | vents, remove it. See “Cleaning the Projector” (page 43). | |
| turn off. | If there is no problem with the projector’s vents, confirm that the POWER/ | |
|
| STANDBY indicator is lit amber (without flashing), and then turn power | |
|
| back on again. If the error occurs again when you turn power back on, | |
|
| contact your retailer or nearest authorized CASIO Service Center. | |
|
|
| |
POWER | : Amber flashing J | Power has turned off automatically due to internal overheating. This | |
| Red steady | causes a dialog box containing the text in the next item below to appear | |
LIGHT | : – | the next time you turn on the projector. Follow the steps that are | |
provided. | |||
TEMP | : Red flashing | ||
| |||
|
| ||
Message | : – |
| |
|
|
| |
POWER | : Green steady | The last time you were using the projector, power turned off automatically | |
LIGHT | : – | due to internal overheating. Press the [ESC] key to clear the warning | |
message and perform the following steps. | |||
TEMP | : – | ||
1 Check for any blocking of the projector’s intake vents and exhaust | |||
|
| ||
Message | : The projector has a | vents, and make sure that there is sufficient space around the | |
| history of turning off due | projector. See “Setup Precautions” (page 10). | |
| to high temperature. | 2 If there is dust accumulated around the intake vents and/or exhaust | |
| Check air vents for | vents, turn off the projector and remove it. See “Cleaning the | |
| blockage. | Projector” (page 43). | |
|
| 3 Disconnect the power cord from the projector and wait for all of the | |
|
| projector’s indicators to go out. Next, reconnect the power cord and | |
|
| turn the projector back on. If the error occurs again when you turn | |
|
| power back on, contact your retailer or nearest authorized CASIO | |
|
| Service Center. | |
|
|
| |
POWER | : Amber flashing J | Power has turned off automatically due to a fan problem. Confirm that the | |
| Red steady | POWER/STANDBY indicator is lit red (without flashing) and that the fan | |
LIGHT | : Red steady | has stopped. After checking the POWER/STANDBY indicator, disconnect | |
the power cord from the projector and wait for all of the projector’s | |||
TEMP | : Red steady | ||
indicators to go out. Next, reconnect the power cord and turn projector | |||
Message | : There is a problem with | power back on. | |
If the error occurs again when you turn power back on, contact your | |||
| the fan. The projector will | ||
| retailer or nearest authorized CASIO Service Center. | ||
| turn off. | ||
|
| ||
|
|
| |
POWER | : Amber flashing J | Power has turned off automatically due to a system problem. After | |
| Red steady | confirming that the POWER/STANDBY indicator is lit red (without | |
LIGHT | : – | flashing), disconnect the power cord from the projector and wait for all of | |
the projector’s indicators to go out. Next, reconnect the power cord and | |||
TEMP | : Red steady | ||
turn the projector back on. | |||
Message | : A system problem has | If the error occurs again when you turn power back on, contact your | |
retailer or nearest authorized CASIO Service Center. | |||
| occurred. The projector | ||
|
| ||
| will turn off. |
| |
|
|
| |
45