Restoring Projector Settings to Their Initial Factory Defaults
You can use the procedures in this section to restore all of the settings on a particular main menu or all of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory defaults
1.
2. Use the [] and [] keys to select the main menu whose settings you want to restore to their initial factory defaults.
You can select Image Adjustment 1, Image Adjustment 2, Volume Adjustment, Screen Settings, Input Settings, Option Settings 1, or Option Settings 2.
3.
4.
5.
Press the [ENTER] key.
Use the [] key to select “Restore Menu Defaults”.
Press the [ENTER] key.
This will display a confirmation screen like the screen shown below.
6.
7. To restore the settings of the main menu to their initial defaults, press the [ENTER] key.
To exit the operation without doing anything, press [ESC] instead of [ENTER].
8.After you are finished, press the [MENU] key to exit the setup menu.
Note
The language setting and the password are not returned to their initial factory defaults if you select Option Settings 1 in step 2.
For details about how the above procedure initializes settings, see the explanations of the settings under “Setup Menu Contents” on page 26.
24