Keep a written record of your password!
You will not be able to use the projector if you forget its password. We strongly suggest that you keep a written or other type of record of the password so you can look it up when necessary.
To change the password
1
2 Use the [T] key to select “Option Settings 1”, and then press the [ENTER] key. 3 Usekey. the [T] key to select “Power On Password”, and then press the [ENTER]
zThis will display a dialog box prompting you to enter the current password.
4 Enter the current password.
z If the projector is still protected by the factory default password, perform the key operation shown below to enter it.
[INPUT][AUTO][BLANK][FREEZE][S][T][W][X]
5
6
7
8
9
After entering the current password, press the [ENTER] key.
zThis displays the Power On Password setting screen.
Use the [T] key to select “Change Password”, and then press the [ENTER] key.
zThis will display a dialog box prompting you to enter the new password.
Enter a key sequence up to eight key operations long.
zYou can use any of the following keys as part of your password key sequence.
[INPUT], [AUTO], [BLANK], [FREEZE], [VOLUME], [COLOR MODE],
], [U], [
], [S], [T], [W], [X], [FUNC]
After entering the new password, press the [ENTER] key.
zThis will display a dialog box prompting you to enter the same password again.
zThe message “Your new password has been registered.” indicates that the password has been changed. Press the [ESC] key.
zIf the password you entered in this step is different from the one you entered in step 7, the message “The password you input is wrong.” appears. Press the [ESC] key to return to step 7.
15