On the Wireless Connection 2 window, select [Connection] - [Switch Connection Profile], which will display the Switch Connection Profile dialog box.
Establish a wireless LAN connection between the computer and Data Projector.

Sending Settings from a Computer to the Data Projector

You can use the Send Settings function of Wireless Connection 2 to send the settings to the Data Projector.

To send connection profile settings from a computer to the Data Projector

1 z For information about connection procedures, see “Using a Simple Connection Profile for a Wireless LAN Connection between the Data Projector and a Single Computer” (page 9).

2

3 Click the “Profile Name” down arrow button and then select the manual connection profile you want to send from the menu that appears.

zIf you want to send Wireless Connection 2 initial manual connection profile values to the XJ-S35/YP-100, here you should select Manual Connection 1, Manual Connection 2, or Manual Connection 3.

zYou cannot select Simple Connection 1, Simple Connection 2, or Simple Connection 3.

4 Click the [Send Settings] button.

z This will display the Send Settings dialog box.

zIf you want to send Wireless Connection 2 initial manual connection profile values to the XJ-S35/YP-100, use this dialog box to select the same connection profile that you selected in step 3, above.

5 Select a destination (Manual Connection 1, Manual Connection 2, or Manual Connection 3), and then click the [OK] button.

zThis will display a dialog box prompting you to enter the password.

zEnter the password that you use when logging in to Web Setup (page 20). The initial default password is “casio”.

34