z This will establish a wireless LAN connection between the computer and Data Projector. z This will close the connected device selection dialog box and display the Wireless
Connection 2 window on the computer screen.
10 On the Wireless Connection 2 window, click one of the projection area position
buttons and then click the button.
z This will cause the contents of the computer screen to be projected so they fill the entire projection area.
z For details about Wireless Connection 2 window operations and Data Projector remote controller operations you can perform after establishing a connection, see “Using Wireless LAN for Projection” (page 50).
32
Move the highlighting to “Projector A” for the projector name and then click the [OK] button.
9
Click the [Connect] button.
z This closes the connection profile switching dialog box and displays the dialog box shown below.
z When the computer finds the Data Projector, the display will change to a dialog box like the one shown below for selecting the connected device.
8
6 After configuring all of the settings you want, click the [Register] button.
7 On the confirmation dialog box that appears, click the [OK] button.
z This will register your settings as a new connection profile and return to the connection profile switching dialog box in step 1.