2
3
4
Perform the procedure under “To switch the Data Projector connection profile” (page 24) to switch the Data Projector connection profile to “Manual Connection 3”.
zThis will cause the “Standing by for connection...” screen to appear in the projection area. Confirm that the screen shows “Manual Connection 3” for the connection profile.
On the Wireless Connection 2 window, select “Switch Connection Profile” on the “Connection” menu.
zThis will display a dialog box for switching the connection profile.
Click the [New] button.
zThis will display a dialog box for configuring a new manual connection profile.
5 On the dialog box for configuring the manual connection setup, configure the settings so they are the same as those that you configured for Manual Connection 3 in step 1 of this procedure.
zMake sure that the IP address is different from the IP address you set in step 1, the IP address of the access point, and any other IP address within the same network.
zFor details about each of the settings on the dialog box, see “Manual Connection Setting Reference” (page 40).
31