
Returning Data Projector Wireless Settings to Their Initial Defaults
You can return all Data Projector Wireless function settings to their initial defaults by executing “Initialize Wireless Setup”. The following are the Wireless initial default settings configured by this operation.
Dialog Box Item | Initial Default |
Connection Keyword (page 27) | Off (no keyword) |
|
|
Show User Name Display (page 53) | On |
|
|
Web Setup (page 22) | Enable |
|
|
To return Data Projector Wireless function settings to their initial defaults
1 While Wireless is shown in the projection area, press the [MENU] key on the Data Projector’s remote controller.
2
3
zThis will display the setup menu.
Press the [T] key to move the highlighting to “USB” and then press the [ENTER] key.
Press the [T] key once to move the highlighting to “Setup” and then press the [ENTER] key.
zThis will display the Wireless setup menu.
4 Press the [T] key to move the highlighting to “Initialize Wireless Setup”. 5 Press the [ENTER] key.
zThis displays the dialog box shown below.
6
z This initializes all Wireless settings.
44