CBC Megapixel Camera manual CBC Application Manager, Camera Installer

Megapixel Cameras and Surveillance Software User Manual

CBC Application Manager

Setup.exe places the shortcut to the CBC Application Managers on the user’s Desktop. All programs and utilities comprising CBC Video System can be accessed via CBC Application Manager. The standard selections include Camera Installer, Video System, and AVI Maker. The Firmware Loader can also be listed as shown below if the CBCFirmwareLoader.exe is placed in the CBC (America) Video Surveillance folder.

Camera Installer

Camera Installer allows to find all CBC cameras that are present on the local area network, assign IP addresses to detected cameras and to verify that the cameras are accessible and operational. Camera Installer saves information about installed cameras into an .ini file used by CBC Video System. Camera Installer supports two modes of operation – Basic and Advanced.

•Basic Mode – In this mode Camera Installer detects all CBC cameras that can be reached by the broadcast request and automatically assigns IP addresses to the cameras, selecting those addresses that belong to the same sub-network as the computer running Camera Installer and that are not assigned to other devices. To detect and install the cameras automatically the user should simply press Automatic button in the Basic mode. The installer will find, configure and verify the operability of the cameras and will report installation results as shown below. Once the installation is completed the user should press Save/Exit button to save the installation information in the MPS .ini file

CBC (America) Proprietary Information p.13