Mains Electricity Connection

THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWITCHED FUSED SPUR OUTLET AND PROTECTED BY A 3A FUSE.

We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.

The wires in the mains lead of this appliance are coloured in accordance with the following code:

BLUE = NEUTRAL, BROWN = LIVE.

As the colours of the wires in the mains lead for the appliance may not correspond with the coloured markings identifying the terminals connecting to the fused spur, proceed as follows:

The wire which is coloured blue must be connected to the terminal marked N (Neutral), or coloured black.

The wire which is coloured brown must be connected to the terminal marked L (Live), or coloured red.

DOUBLE POLE SWITCHED

FUSED SPUR OUTLET

USE A 3 AMP FUSE

NOTE: USE A 3A FUSE

Assembly and electrical connection should be carried out by competent personnel.

When installing this product we recommend you seek the help of another individual.

IMPORTANT: THIS APPLIANCE IS A CLASS II APPLIANCE (DOUBLE INSULATED) AND IS NOT INTENDED TO BE EARTHED. DO NOT FIT AN EARTH LEAD TO THIS EXTRACTOR.

Do not mount the isolation switch behind the chimney section. It is a requirement that you must be able to isolate the extractor from the mains electrical supply after installation.

This appliance is intended to be connected to the mains electrical supply by means of an isolation switch and fused spur and is intended to be protected by a 3A fuse. The use of a 13A fuse can cause damage to the internal wiring in the event of a fault, and may also invalidate the warranty.

Electrical Information

Mains electrical voltage: 230 – 240Vac, 50Hz

Total rated power consumption:

290W

Troubleshooting

If your extractor is not working:

1.Check that the mains supply has not been switched off.

2.Check that the fuse in the spur has not blown.

5

Page 6
Image 6
CDA 3Q9 manual Mains Electricity Connection, Electrical Information, Total rated power consumption

3Q9 specifications

CDA 3Q9 is a powerful radio communication technology developed to enhance connectivity in various applications, including military operations, emergency services, and commercial sectors. This system plays a crucial role in establishing reliable and secure communication channels, particularly in challenging environments where conventional systems may falter.

One of the main features of CDA 3Q9 is its advanced modulation techniques, which allow for better signal integrity and bandwidth efficiency. This contributes to clearer transmissions over long distances, making it an ideal choice for tactical scenarios where clarity is paramount. The system utilizes a combination of frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) technologies, ensuring resilience against interference and jamming, which are prevalent in the modern communication landscape.

Another key characteristic of CDA 3Q9 is its compatibility with multiple frequency bands. This versatility ensures that users can switch between bands based on operational needs or regional regulations, thus maximizing coverage and flexibility. The system also supports both analog and digital transmissions, catering to a wide array of communication requirements and preferences.

CDA 3Q9 is designed with robust encryption protocols to protect sensitive information during transmission. This security feature is essential for military operations and any scenario where data confidentiality is critical. The integration of Advanced Encryption Standard (AES) ensures that even if communications are intercepted, the information remains secure and inaccessible to unauthorized entities.

Additionally, the CDA 3Q9 system is built for mobility, featuring lightweight components and compact designs that facilitate easy deployment in the field. This portability makes it an attractive option for units that require rapid setup and takedown capabilities during missions.

Moreover, the ease of integration with existing infrastructures is a standout quality of CDA 3Q9. Users can seamlessly incorporate this system into their current setups without extensive overhauls, saving both time and resources while enhancing overall communication effectiveness.

In conclusion, CDA 3Q9 presents a sophisticated solution for modern communication challenges, characterized by its advanced modulation techniques, multi-band compatibility, robust security features, and ease of deployment. By capitalizing on the latest technologies, it equips users with a reliable and efficient means of communication, crucial for success in dynamic and unpredictable environments.