EN
4.12 TIME REMAINING
Delay Timer symbol
Start pause symbol
Start Pause
Delay Timer button
1.The Delay Timer can be pressed repeatedly to select the time after which the washing programme will end. The time left before the end of the cycle calculates the initial duration of the washing cycle, the set- tings made (temperature, spin speed and options) which may shorten or lengthen the cycle's initial dura- tion, and the delay time the user wishes to add before the cycle starts.
2.After the Delay Timer function has been set, the symbol on the display remains on.
3.To annul the Delay Timer function, keep pressing the button repeatedly until the display shows 0.
4.The Start Pause symbol flashes on and off until the cycle starts. After the cycle starts, the symbol re- mains constantly lit.
4.13STARTING THE WASHING PROGRAMME
1.To start the washing programme after making your personal settings, press the Start Pause button.
2.Once the cycle has started, the display shows the time remaining before the end of the cycle and the Start Pause symbol on the display is constantly on.
3.During performance of the washing/drying programme, the symbols which identify the various phases light up:
Cycle phase symbols: Prewash, wash, rinse and final spin.
4.14 INTERRUPTING OR CHANGING THE WASHING PROGRAMME
The washing programme in progress can be interrupted at any moment:
1.Press the “Start/Pause” button for about 3 seconds: the display shows the word PAUS (for 1 second) al- ternating with the time remaining until the end of the cycle (for 1 second). The Start/Pause light flashes on and off.
Programmes can also be interrupted by turning the programme/temperature setting knob while the cycle is in progress.
2.To change the washing programme, simply turn the programme knob to select the new programme; the- re is no need to set the appliance in pause status. The new cycle will be carried out completely, begin- ning from the start. If the tank had already been filled with water during the previous cycle, the water in- take phase will be omitted from the new programme.
3.To restart the cycle, press the
13
