Setting the temperature
Both compartment temperatures are regulated by the same thermostat dial, which is found to the right of the control panel at the top of the door frame when the fridge door is open. The thermostat can be moved between 1 (least cold) and 5 (coldest).
Thermostat settings:
5For freezing fresh food. Once the food has been frozen, the thermostat should then be turned back to the required setting between 1 and 4.
Fast freeze
This appliance is supplied with a fast freeze function, which allows fresh food to be frozen more quickly. To select the fast freeze function, turn the switch, located in the top of the refrigerator compartment, to 1. To switch the fast freeze function off, turn the switch to 0.
Please note that for better energy efficiency, the fast freeze function should be switched off when not required.
If the ambient temperature is less than 10º, then the fast freeze function can be used continuously to improve the performance of the appliance. However, if the ambient temperature is more than 10º, then the fast freeze must be switched off when it is not required.
To make best use of the fast freeze function, the middle two compartments should be used.
Control panel
The control panel for the fridge has three lights (Fig. 1):
A. Orange Fast Freeze light
This light is illuminated when the fast freeze function is on.
B. Green Power light
This light is illuminated when the power supply to appliance is on.
C. Red Temperature Warning light
A B C
fig. 1
This light is illuminated when the freezer compartment temperature is too warm. When this light is illuminated, switch on the fast freeze function until the red light goes out, then switch off the fast freeze function.
Please note:
If the red light is lit for more than 24 hours, switch off the fast freeze function and call CDA Customer Care.
