Installing the decor door
•Screw mounting bracket (1) onto decor door using the screws supplied (as show in figure 4).
•Fit the correct side towards the hinges.
•Ensure there is a 5mm clearance between
the underside of the worktop and upper edge (X) of the decor panel.
•Screw the four adjusting pins (2) fully into the appliance door.
•Position the decor door on the appliance
door, introduce the locating pins at top into the slots in the mounting plate and open out according to detail in figure 5 (about 9mm).
fig. 4
fig. 5
