CDA FW820 Care and cleaning, Changing the light bulb, Disconnect the appliance from the power

Models: FW820

1 12
Download 12 pages 52.58 Kb
Page 4
Image 4
Care and cleaning

Care and cleaning

Always disconnect the appliance from the power before any cleaning or maintenance.

The refrigerator should be cleaned using a solution of bicarbonate of soda and lukewarm water.

Do not use abrasive products or detergents. After washing, rinse and dry thoroughly.

Clean the shelves and balconies separately by hand using soap and water. Do not put them in the dishwasher.

The evaporating tray and water drain hole (at the back of the compartment) should be cleaned periodically to prevent the defrosted water from collecting inside the compartment. The drain plug can be used to clear the drain hole.

Once cleaning is complete, reconnect the mains power supply.

If the appliance is not used for prolonged periods of time or in the event of a prolonged power cut unplug and clean the appliance. The doors should be left slightly open to prevent the formation of mildew and smell.

The door sea soul be cleaned periodically.

Clean the switch, lamp and thermostat control with a dry cloth.

Changing the light bulb

Disconnect the appliance from the power.

Remove the light cover.

Replace the light cover and reconnect the power after five minutes’ delay as explained on page 3.

Page 4
Image 4
CDA FW820 manual Care and cleaning, Changing the light bulb, Disconnect the appliance from the power